Update version

Adds a new `has:*` filter. Specifically, `has:pin`.
The filter filters for messages that are pinned.

.gitattributes

@@ -1,63 +0,0 @@
-###############################################################################
-# Set default behavior to automatically normalize line endings.
-###############################################################################
-* text=auto
-
-###############################################################################
-# Set default behavior for command prompt diff.
-#
-# This is need for earlier builds of msysgit that does not have it on by
-# default for csharp files.
-# Note: This is only used by command line
-###############################################################################
-#*.cs     diff=csharp
-
-###############################################################################
-# Set the merge driver for project and solution files
-#
-# Merging from the command prompt will add diff markers to the files if there
-# are conflicts (Merging from VS is not affected by the settings below, in VS
-# the diff markers are never inserted). Diff markers may cause the following 
-# file extensions to fail to load in VS. An alternative would be to treat
-# these files as binary and thus will always conflict and require user
-# intervention with every merge. To do so, just uncomment the entries below
-###############################################################################
-#*.sln       merge=binary
-#*.csproj    merge=binary
-#*.vbproj    merge=binary
-#*.vcxproj   merge=binary
-#*.vcproj    merge=binary
-#*.dbproj    merge=binary
-#*.fsproj    merge=binary
-#*.lsproj    merge=binary
-#*.wixproj   merge=binary
-#*.modelproj merge=binary
-#*.sqlproj   merge=binary
-#*.wwaproj   merge=binary
-
-###############################################################################
-# behavior for image files
-#
-# image files are treated as binary by default.
-###############################################################################
-#*.jpg   binary
-#*.png   binary
-#*.gif   binary
-
-###############################################################################
-# diff behavior for common document formats
-# 
-# Convert binary document formats to text before diffing them. This feature
-# is only available from the command line. Turn it on by uncommenting the 
-# entries below.
-###############################################################################
-#*.doc   diff=astextplain
-#*.DOC   diff=astextplain
-#*.docx  diff=astextplain
-#*.DOCX  diff=astextplain
-#*.dot   diff=astextplain
-#*.DOT   diff=astextplain
-#*.pdf   diff=astextplain
-#*.PDF   diff=astextplain
-#*.rtf   diff=astextplain
-#*.RTF   diff=astextplain

.github/ISSUE_TEMPLATE/bug-report.yml

@@ -0,0 +1,64 @@
+name: 🐞 Bug report
+description: Report broken functionality.
+labels: [bug]
+
+body:
+- type: markdown
+  attributes:
+    value: |
+      🧐 **Guidelines:**
+
+      - Search through [existing issues](https://github.com/Tyrrrz/DiscordChatExporter/issues?q=is%3Aissue) first to ensure that this bug has not been reported before.
+      - Write a descriptive title for your issue. Avoid generic or vague titles such as "Something's not working" or "A couple of problems".
+      - Keep your issue focused on one single problem. If you have multiple bug reports, please create separate issues for each of them.
+      - Provide as much context as possible in the details section. Include screenshots, screen recordings, links, references, or anything else you may consider relevant.
+      - If you want to ask a question instead of reporting a bug, please use [discussions](https://github.com/Tyrrrz/DiscordChatExporter/discussions/new) instead.
+
+- type: input
+  attributes:
+    label: Version
+    description: Which version of DiscordChatExporter does this bug affect?
+    placeholder: ver X.Y.Z
+  validations:
+    required: true
+
+- type: dropdown
+  attributes:
+    label: Flavor
+    description: Does this bug affect the GUI version, the CLI version, or both?
+    multiple: true
+    options:
+    - GUI (Graphical User Interface)
+    - CLI (Command Line Interface)
+  validations:
+    required: true
+
+- type: dropdown
+  attributes:
+    label: Export format
+    description: Does this bug affect specific export format(s)? If not applicable, leave this field blank.
+    multiple: true
+    options:
+    - HTML
+    - TXT
+    - JSON
+    - CSV
+
+- type: textarea
+  attributes:
+    label: Details
+    description: Clear and thorough explanation of the bug.
+    placeholder: I was doing X expecting Y to happen, but Z happened instead.
+  validations:
+    required: true
+
+- type: textarea
+  attributes:
+    label: Steps to reproduce
+    description: Minimum steps required to reproduce the bug.
+    placeholder: |
+      - Step 1
+      - Step 2
+      - Step 3
+  validations:
+    required: true

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,11 @@
+blank_issues_enabled: false
+contact_links:
+  - name: 💬 Discord server
+    url: https://discord.gg/2SUWKFnHSm
+    about: Chat with the project community.
+  - name: 📖 Wiki
+    url: https://github.com/Tyrrrz/DiscordChatExporter/wiki
+    about: Find usage guides and frequently asked questions.
+  - name: 🗨 Discussions
+    url: https://github.com/Tyrrrz/DiscordChatExporter/discussions/new
+    about: Ask and answer questions.

.github/ISSUE_TEMPLATE/feature-request.yml

@@ -0,0 +1,42 @@
+name: ✨ Feature request
+description: Request a new feature.
+labels: [enhancement]
+
+body:
+- type: markdown
+  attributes:
+    value: |
+      🧐 **Guidelines:**
+
+      - Search through [existing issues](https://github.com/Tyrrrz/DiscordChatExporter/issues?q=is%3Aissue) first to ensure that this feature has not been requested before.
+      - Write a descriptive title for your issue. Avoid generic or vague titles such as "Some suggestions" or "Ideas for improvement".
+      - Keep your issue focused on one single problem. If you have multiple feature requests, please create separate issues for each of them.
+      - Provide as much context as possible in the details section. Include screenshots, screen recordings, links, references, or anything else you may consider relevant.
+      - If you want to ask a question instead of requesting a feature, please use [discussions](https://github.com/Tyrrrz/DiscordChatExporter/discussions/new) instead.
+
+- type: dropdown
+  attributes:
+    label: Flavor
+    description: Is this feature request related to specific flavor(s) of DiscordChatExporter? If not applicable, leave this field blank.
+    multiple: true
+    options:
+    - GUI (Graphical User Interface)
+    - CLI (Command Line Interface)
+
+- type: dropdown
+  attributes:
+    label: Export format
+    description: Is this feature request related to specific export format(s)? If not applicable, leave this field blank.
+    multiple: true
+    options:
+    - HTML
+    - TXT
+    - JSON
+    - CSV
+
+- type: textarea
+  attributes:
+    label: Details
+    description: Clear and thorough explanation of the feature you have in mind.
+  validations:
+    required: true

.github/workflows/docker.yml

@@ -0,0 +1,55 @@
+name: docker
+
+on: [push, pull_request]
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Build container
+        run: docker build .
+
+  deploy-latest:
+    if: ${{ github.event_name == 'push' && github.ref_type == 'branch' && github.ref_name == 'master' }}
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Login to DockerHub
+        run: docker login -u tyrrrz -p ${{ secrets.DOCKER_TOKEN }}
+
+      - name: Build container
+        run: docker build -t tyrrrz/discordchatexporter:latest .
+
+      - name: Push container
+        run: docker push tyrrrz/discordchatexporter:latest
+
+  deploy-stable:
+    if: ${{ github.event_name == 'push' && github.ref_type == 'tag' }}
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Get release version
+        id: get_version
+        uses: dawidd6/action-get-tag@v1
+
+      - name: Login to DockerHub
+        run: docker login -u tyrrrz -p ${{ secrets.DOCKER_TOKEN }}
+
+      - name: Build container
+        run: docker build -t tyrrrz/discordchatexporter:stable .
+
+      - name: Push container (stable)
+        run: docker push tyrrrz/discordchatexporter:stable
+
+      - name: Push container (${{ steps.get_version.outputs.tag }})
+        run: docker push tyrrrz/discordchatexporter:${{ steps.get_version.outputs.tag }}

.github/workflows/main.yml

@@ -0,0 +1,154 @@
+name: main
+
+on: [push, pull_request]
+
+jobs:
+  test:
+    runs-on: windows-latest
+
+    env:
+      DOTNET_SKIP_FIRST_TIME_EXPERIENCE: true
+      DOTNET_NOLOGO: true
+      DOTNET_CLI_TELEMETRY_OPTOUT: true
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Install .NET
+        uses: actions/setup-dotnet@v2
+        with:
+          # Fixed version, workaround for https://github.com/dotnet/core/issues/7176
+          dotnet-version: 6.0.100
+
+      - name: Run tests
+        # Tests need access to secrets, so we can't run them against PRs because of limited trust
+        if: ${{ github.event_name != 'pull_request' }}
+        run: dotnet test --configuration Release --logger GitHubActions --collect:"XPlat Code Coverage" -- DataCollectionRunSettings.DataCollectors.DataCollector.Configuration.Format=opencover
+        env:
+          DISCORD_TOKEN: ${{ secrets.DISCORD_TOKEN }}
+          DISCORD_TOKEN_BOT: true
+
+      - name: Upload coverage
+        uses: codecov/codecov-action@v3
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+
+  publish:
+    needs: test
+    runs-on: windows-latest
+
+    env:
+      DOTNET_SKIP_FIRST_TIME_EXPERIENCE: true
+      DOTNET_NOLOGO: true
+      DOTNET_CLI_TELEMETRY_OPTOUT: true
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Install .NET
+        uses: actions/setup-dotnet@v2
+        with:
+          # Fixed version, workaround for https://github.com/dotnet/core/issues/7176
+          dotnet-version: 6.0.100
+
+      - name: Publish (CLI)
+        run: dotnet publish DiscordChatExporter.Cli/ -o DiscordChatExporter.Cli/bin/Publish/ --configuration Release
+
+      - name: Publish (GUI)
+        run: dotnet publish DiscordChatExporter.Gui/ -o DiscordChatExporter.Gui/bin/Publish/ --configuration Release
+
+      - name: Upload artifacts (CLI)
+        uses: actions/upload-artifact@v3
+        with:
+          name: DiscordChatExporter.Cli
+          path: DiscordChatExporter.Cli/bin/Publish/
+
+      - name: Upload artifacts (GUI)
+        uses: actions/upload-artifact@v3
+        with:
+          name: DiscordChatExporter
+          path: DiscordChatExporter.Gui/bin/Publish/
+
+  deploy:
+    if: ${{ github.event_name == 'push' && github.ref_type == 'tag' }}
+    needs: publish
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Download artifacts (CLI)
+        uses: actions/download-artifact@v3
+        with:
+          name: DiscordChatExporter.Cli
+          path: DiscordChatExporter.Cli
+
+      - name: Download artifacts (GUI)
+        uses: actions/download-artifact@v3
+        with:
+          name: DiscordChatExporter
+          path: DiscordChatExporter.Gui
+
+      - name: Create package (CLI)
+        run: Compress-Archive -Path DiscordChatExporter.Cli/* -DestinationPath DiscordChatExporter.Cli.zip -Force
+        shell: pwsh
+
+      - name: Create package (GUI)
+        run: Compress-Archive -Path DiscordChatExporter.Gui/* -DestinationPath DiscordChatExporter.Gui.zip -Force
+        shell: pwsh
+
+      - name: Create release
+        id: create_release
+        uses: actions/create-release@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          tag_name: ${{ github.ref }}
+          release_name: ${{ github.ref }}
+          body: |
+            [Changelog](https://github.com/Tyrrrz/DiscordChatExporter/blob/master/Changelog.md)
+          draft: false
+          prerelease: false
+
+      - name: Upload release asset (CLI)
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_name: DiscordChatExporter.Cli.zip
+          asset_path: DiscordChatExporter.Cli.zip
+          asset_content_type: application/zip
+
+      - name: Upload release asset (GUI)
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_name: DiscordChatExporter.zip
+          asset_path: DiscordChatExporter.Gui.zip
+          asset_content_type: application/zip
+
+  notify:
+    needs: deploy
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Get release version
+        id: get_version
+        uses: dawidd6/action-get-tag@v1
+
+      - name: Notify Discord
+        uses: satak/webrequest-action@v1.2.4
+        with:
+          url: ${{ secrets.DISCORD_WEBHOOK }}
+          method: POST
+          headers: |
+            {
+              "ContentType": "application/json; charset=UTF-8"
+            }
+          payload: |
+            {
+              "content": "**DiscordChatExporter** new version released!\nVersion: `${{ steps.get_version.outputs.tag }}`\nChangelog: <https://github.com/Tyrrrz/DiscordChatExporter/blob/${{ steps.get_version.outputs.tag }}/Changelog.md>"
+            }

.gitignore

@@ -1,261 +1,25 @@
-## Ignore Visual Studio temporary files, build results, and
-## files generated by popular Visual Studio add-ons.
-
 # User-specific files
 *.suo
 *.user
 *.userosscache
 *.sln.docstates
-
-# User-specific files (MonoDevelop/Xamarin Studio)
-*.userprefs
+.idea/
+.vs/
 
 # Build results
 [Dd]ebug/
 [Dd]ebugPublic/
 [Rr]elease/
 [Rr]eleases/
-x64/
-x86/
+[Xx]64/
+[Xx]86/
+[Bb]uild/
 bld/
 [Bb]in/
 [Oo]bj/
-[Ll]og/
 
-# Visual Studio 2015 cache/options directory
-.vs/
-# Uncomment if you have tasks that create the project's static files in wwwroot
-#wwwroot/
+# Coverage
+*.opencover.xml
 
-# MSTest test Results
-[Tt]est[Rr]esult*/
-[Bb]uild[Ll]og.*
-
-# NUNIT
-*.VisualState.xml
-TestResult.xml
-
-# Build Results of an ATL Project
-[Dd]ebugPS/
-[Rr]eleasePS/
-dlldata.c
-
-# DNX
-project.lock.json
-project.fragment.lock.json
-artifacts/
-
-*_i.c
-*_p.c
-*_i.h
-*.ilk
-*.meta
-*.obj
-*.pch
-*.pdb
-*.pgc
-*.pgd
-*.rsp
-*.sbr
-*.tlb
-*.tli
-*.tlh
-*.tmp
-*.tmp_proj
-*.log
-*.vspscc
-*.vssscc
-.builds
-*.pidb
-*.svclog
-*.scc
-
-# Chutzpah Test files
-_Chutzpah*
-
-# Visual C++ cache files
-ipch/
-*.aps
-*.ncb
-*.opendb
-*.opensdf
-*.sdf
-*.cachefile
-*.VC.db
-*.VC.VC.opendb
-
-# Visual Studio profiler
-*.psess
-*.vsp
-*.vspx
-*.sap
-
-# TFS 2012 Local Workspace
-$tf/
-
-# Guidance Automation Toolkit
-*.gpState
-
-# ReSharper is a .NET coding add-in
-_ReSharper*/
-*.[Rr]e[Ss]harper
-*.DotSettings.user
-
-# JustCode is a .NET coding add-in
-.JustCode
-
-# TeamCity is a build add-in
-_TeamCity*
-
-# DotCover is a Code Coverage Tool
-*.dotCover
-
-# NCrunch
-_NCrunch_*
-.*crunch*.local.xml
-nCrunchTemp_*
-
-# MightyMoose
-*.mm.*
-AutoTest.Net/
-
-# Web workbench (sass)
-.sass-cache/
-
-# Installshield output folder
-[Ee]xpress/
-
-# DocProject is a documentation generator add-in
-DocProject/buildhelp/
-DocProject/Help/*.HxT
-DocProject/Help/*.HxC
-DocProject/Help/*.hhc
-DocProject/Help/*.hhk
-DocProject/Help/*.hhp
-DocProject/Help/Html2
-DocProject/Help/html
-
-# Click-Once directory
-publish/
-
-# Publish Web Output
-*.[Pp]ublish.xml
-*.azurePubxml
-# TODO: Comment the next line if you want to checkin your web deploy settings
-# but database connection strings (with potential passwords) will be unencrypted
-#*.pubxml
-*.publishproj
-
-# Microsoft Azure Web App publish settings. Comment the next line if you want to
-# checkin your Azure Web App publish settings, but sensitive information contained
-# in these scripts will be unencrypted
-PublishScripts/
-
-# NuGet Packages
-*.nupkg
-# The packages folder can be ignored because of Package Restore
-**/packages/*
-# except build/, which is used as an MSBuild target.
-!**/packages/build/
-# Uncomment if necessary however generally it will be regenerated when needed
-#!**/packages/repositories.config
-# NuGet v3's project.json files produces more ignoreable files
-*.nuget.props
-*.nuget.targets
-
-# Microsoft Azure Build Output
-csx/
-*.build.csdef
-
-# Microsoft Azure Emulator
-ecf/
-rcf/
-
-# Windows Store app package directories and files
-AppPackages/
-BundleArtifacts/
-Package.StoreAssociation.xml
-_pkginfo.txt
-
-# Visual Studio cache files
-# files ending in .cache can be ignored
-*.[Cc]ache
-# but keep track of directories ending in .cache
-!*.[Cc]ache/
-
-# Others
-ClientBin/
-~$*
-*~
-*.dbmdl
-*.dbproj.schemaview
-*.jfm
-*.pfx
-*.publishsettings
-node_modules/
-orleans.codegen.cs
-
-# Since there are multiple workflows, uncomment next line to ignore bower_components
-# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
-#bower_components/
-
-# RIA/Silverlight projects
-Generated_Code/
-
-# Backup & report files from converting an old project file
-# to a newer Visual Studio version. Backup files are not needed,
-# because we have git ;-)
-_UpgradeReport_Files/
-Backup*/
-UpgradeLog*.XML
-UpgradeLog*.htm
-
-# SQL Server files
-*.mdf
-*.ldf
-
-# Business Intelligence projects
-*.rdl.data
-*.bim.layout
-*.bim_*.settings
-
-# Microsoft Fakes
-FakesAssemblies/
-
-# GhostDoc plugin setting file
-*.GhostDoc.xml
-
-# Node.js Tools for Visual Studio
-.ntvs_analysis.dat
-
-# Visual Studio 6 build log
-*.plg
-
-# Visual Studio 6 workspace options file
-*.opt
-
-# Visual Studio LightSwitch build output
-**/*.HTMLClient/GeneratedArtifacts
-**/*.DesktopClient/GeneratedArtifacts
-**/*.DesktopClient/ModelManifest.xml
-**/*.Server/GeneratedArtifacts
-**/*.Server/ModelManifest.xml
-_Pvt_Extensions
-
-# Paket dependency manager
-.paket/paket.exe
-paket-files/
-
-# FAKE - F# Make
-.fake/
-
-# JetBrains Rider
-.idea/
-*.sln.iml
-
-# CodeRush
-.cr/
-
-# Python Tools for Visual Studio (PTVS)
-__pycache__/
-*.pyc
+# Secrets
+*.secret

Changelog.md

@@ -1,3 +1,262 @@
+### v2.34.1 (01-Jun-2022)
+
+- Improved retry policy to handle more transient errors. This should result in fewer errors exporting a channel due to timeout.
+- Added `has:pin` message filter. You can use it to limit exported messages to those that have been pinned. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+- Fixed an issue which caused the export to fail when processing stickers that have no name.
+
+### v2.34 (10-Apr-2022)
+
+- [HTML] Reworked layout to be more consistent with Discord.
+- [HTML] Changed user profile picture dimensions from `128x128` to `512x512`. (Thanks [@Chris Helder](https://github.com/TheDude53))
+- [HTML] Improved image scaling for Chromium-based browsers. This should result in higher quality images across the entire export.
+- [HTML] Hovering over messages will now show short timestamps on the left, indicating the time that the individual messages of the group were sent.
+- [HTML] Using "download media" option will now also download scripts, styles, fonts, and other similar resources used by the export.
+- [HTML] Image attachments will now use the provided description as alt text.
+- [HTML] Fixed a few layout inconsistencies related to embeds.
+- [GUI] Added a few clickable links to the usage guide to make the process of locating tokens easier.
+
+### v2.33.2 (07-Mar-2022)
+
+- Actually fixed it this time.
+
+### v2.33.1 (07-Mar-2022)
+
+- Fixed an issue where the application silently failed to run if the system didn't have .NET Runtime 6.0.2 installed. If you continue seeing this issue, please uninstall all existing .NET runtimes from your computer and then try running the application again.
+
+### v2.33 (06-Mar-2022)
+
+- Added messages informing about war in Ukraine and available ways to help.
+- Added support for rendering stickers in HTML and JSON. Lottie-based stickers currently cannot be displayed in HTML exports (see [#803](https://github.com/Tyrrrz/DiscordChatExporter/issues/803)).
+- Added a new `reaction:` message filter which can be used to check if someone reacted to a message with a specific emoji. You can either pass the emoji name (e.g. `reaction:LUL`) or its ID (e.g. `reaction:41771983429993937`).
+- [GUI] Added auto-detection for dark mode. If your system is configured to prefer dark mode in applications, DiscordChatExporter will use it by default instead of light mode.
+- Fixed an issue which caused the export process to crash when downloading media files with extremely long file extensions. (Thanks [@Tomlacko](https://github.com/Tomlacko))
+- Fixed an issue which caused the export process to crash on invalid mentions.
+- [GUI] Fixed an issue where the time pickers used to specify export ranges always displayed time in 12-hour format, instead of respecting the system locale.
+
+### v2.32 (27-Jan-2022)
+
+- Token kind (user or bot) is now detected automatically. Removed the button to switch token kind in GUI. Option `-b|--bot` in CLI is now deprecated and does nothing.
+- Updated user token extraction guide to reflect the fact that devtools are no longer accessible in the desktop version of Discord client. The recommended workaround is to open Discord in browser. (Thanks [@Dhananjay-JSR](https://github.com/Dhananjay-JSR))
+- Fixed an issue which caused an error when parsing invalid date timestamps. Such timestamps are now rendered as "Invalid date", similarly to how the Discord client does it.
+- Fixed an issue which caused an error when parsing certain embed fields.
+- Fixed an issue which caused an error when parsing a mention to a user that has no username.
+- [GUI] Minor visual fixes.
+
+### v2.31.1 (15-Dec-2021)
+
+- Fixed an issue which caused an error when parsing certain custom emoji reactions.
+- [GUI] Improved user interface.
+
+### v2.31 (06-Dec-2021)
+
+- Changed target runtime of the application (both GUI and CLI) from .NET 3.1 to .NET 6. Those using the GUI version will not need to take any action as the application should install the necessary prerequisites automatically. Those using the CLI version will need to download and install .NET 6 runtime manually [from here](https://dotnet.microsoft.com/download/dotnet/6.0) (look for ".NET Runtime 6.0.x" section on the right and choose the distribution appropriate for your system).
+- [HTML] Updated layout design to match Discord more closely. (Thanks [@Artem](https://github.com/Scarg))
+- [HTML] Fixed an issue where markdown inside channel topic was not rendered correctly. (Thanks [@Emily](https://github.com/emillly-b))
+- [HTML] Fixed an issue where the layout was broken for messages containing text in right-to-left languages. (Thanks [@Emily](https://github.com/emillly-b))
+- Fixed an issue where text filters weren't matching content inside of embeds.
+- [GUI] Fixed a multitude of issues related to the bootstrapper.
+
+### v2.30.1 (28-Aug-2021)
+
+- [HTML] Changed user avatars to render using higher resolution images. (Thanks [@Chris Helder](https://github.com/TheDude53))
+- Fixed an issue where `has:file` message filter was not recognized. (Thanks [@Lucas LaBuff](https://github.com/96-LB))
+- Fixed an issue where a unix timestamp marker with an invalid offset crashed the export process.
+
+### v2.30 (08-Aug-2021)
+
+- [HTML] Added special casing for Spotify track embeds to render them directly using an embedded player.
+- [HTML] Added special casing for plain image embeds to render them like image attachments.
+- [HTML] Added tooltip text for unix timestamp markers which shows the full date represented by the timestamp, regardless of configured date format. 
+- [HTML] Updated the fallback text shown when the referenced message could not be loaded to make it more explicit.
+- [HTML] Updated styling of quoted text in markdown to more closely resemble how it looks in Discord.
+- [HTML] Fixed an issue where some file formats were not correctly recognized as image or video attachments, which affected how they were rendered.
+- [HTML] Fixed an issue where formatting inside named links (e.g. `[**Bold link**](https://example.com)`) was not being parsed.
+- [HTML] Fixed an issue where inline embed fields were missing horizontal spacing between columns.
+- [HTML] Fixed other minor styling issues.
+
+### v2.29 (19-Jul-2021)
+
+- Added support for message filtering, which is accessible as an additional export parameter in the GUI and as the `--filter` option in the CLI. Message filters use a special syntax similar to Discord's search query syntax to allow specifying which messages should be included in the export. For example, you can limit the export to only include messages that contain image attachments (`has:image`) or messages from a certain user (`from:Tyrrrz`) or messages containing certain words (`hello world`), etc. You can also combine filters together (`hi mentions:Tyrrrz`, `from:Tyrrrz | from:96-LB`, `(mentions:Tyrrrz | from:Tyrrrz) has:image`) or negate them (`-has:link`). More thorough documentation coming soon. (Thanks [@Lucas LaBuff](https://github.com/96-LB))
+- Added support for rendering mentions of voice channels, in addition to text channels.
+- Added support for rendering unix timestamp markers. Currently, style markers are ignored and timestamps are always rendered with the format configured in settings (or provided via `--date-format` option).
+- Updated in-app instructions for obtaining a user token. (Thanks [@Yudi](https://github.com/Yudi) and [@virtuallyvlad](https://github.com/virtuallyvlad))
+- [HTML] Improved visual appearance of the reference symbol (Г-shaped line in replies) to make it more closely resemble Discord's styling.
+- [HTML] Added more specific fallback text used when rendering referenced messages that contain no text content but have attachments or embeds.
+- [HTML] Fixed an issue where a broken embed author icon occupied visual space, ruining the embed layout. (Thanks [@Cliff J.](https://github.com/CliffJameston))
+- [GUI] Improved handling for fatal errors that may occur when attempting to export a channel. These errors are now displayed in a popup, allowing the user to try again instead of having the application crash completely.
+- [CLI] Fixed an issue where an attempt to export a channel resulted in `NotSupportedException` when the default encoding was set to `UTF8`.
+- [CLI] Fixed an issue where providing an incorrectly formatted partition limit via `-p|--partition` option resulted in a non-descriptive and unhelpful error.
+- Improved "Requested resource does not exist" error message by including the ID of the requested resource.
+
+### v2.28 (19-Jun-2021)
+
+- [HTML] Added special casing for YouTube video embeds to render them directly using an embedded player. (Thanks [@quentinmay](https://github.com/quentinmay))
+- [HTML] Added support for rendering standard emoji by code. Such emoji may sometimes be found in messages sent by bots or through webhooks. (Thanks [@CanePlayz](https://github.com/CanePlayz) and [@Lucas LaBuff](https://github.com/96-LB))
+- [HTML] Changed tooltips on standard emoji to show emoji code instead of their raw string representations. (Thanks [@CanePlayz](https://github.com/CanePlayz) and [@Lucas LaBuff](https://github.com/96-LB))
+- [HTML] Added tooltips on individual messages to show when those messages were sent. 
+- [HTML] Updated colors and minor styling elements to match Discord's new style direction after rebranding.
+- [HTML] Updated Twemoji URLs to use SVG image variants for better rendering quality.
+- [HTML] Changed user avatar URLs to include predetermined size query parameter for better rendering quality.
+- Changed embed rendering logic to prefer Discord-proxied URLs for external content, in order to avoid unnecessary HTTP requests to third parties.
+- Fixed an issue where exporting with media sometimes resulted in a crash due to lack of permissions to change file attributes. These errors are now ignored, which means that the creation, write, and access dates of downloaded files may sometimes not match the dates provided by Discord's CDN.
+- [HTML] Fixed styling issues when rendering embed footers.
+- [HTML] Fixed an issue where links didn't render properly inside referenced messages.
+- [HTML] Fixed an issue where standalone emoji were incorrectly enlarged inside referenced messages.
+- [HTML] Fixed an issue where clicking on a referenced message revealed spoilers inside of it.
+- [GUI] Fixed an issue where the list of missing components, reported by the prerequisite check at application startup, included Windows updates that were not applicable to the user's system due to the fact that other superseding updates have already been installed. This issue only affected users running DiscordChatExporter on Windows 7.
+- [GUI] Fixed a few other minor issues related to the prerequisite installation window.
+
+### v2.27.1 (08-Jun-2021)
+
+- [GUI] Application will now detect if the required .NET Runtime or any of its prerequisites are missing and prompt the user to download and install them automatically. **Experimental feature, please test it out and report any issues you may find!**
+- [CLI] Fixed an issue where the application crashed when exporting a channel that had square brackets as part of its name or category name. (Thanks [@Lucas LaBuff](https://github.com/96-LB))
+
+### v2.27 (24-Apr-2021)
+
+- Added partitioning by file size. You can now use values such as `10mb` to indicate a size-based cut off point, in addition to values like `10` to indicate a number of messages. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+- [CLI] Improved formatting and progress reporting.
+- [CLI] Changed `export` command so that it can accept multiple channel IDs passed to `-c|--channel` option. This makes it possible to export multiple channels at once while benefiting from parallelization.
+- [JSON] Added `color` field to message author. This is a hex string that represents user's color, inherited from their roles. (Thanks [@rtm516](https://github.com/rtm516))
+- [JSON] Added `categoryId` field to the root. This represents the ID of the category channel that the currently exported channel belongs to. (Thanks [@rtm516](https://github.com/rtm516))
+- [JSON] Fixed an issue where user discriminator was written without leading zeroes. (Thanks [@Lucas LaBuff](https://github.com/96-LB))
+- [JSON] Fixed an issue where the application sometimes crashed with an error saying `']' invalid without a matching open`, which was just a validation message that masked the actual error behind the failure. (Thanks [@Lucas LaBuff](https://github.com/96-LB))
+- Fixed an issue where progress was not reported correctly if the channel didn't have any messages in the specified time range.
+
+### v2.26.1 (06-Feb-2021)
+
+- [CLI] Added support for file name templates, which allow you to dynamically generate output file names based on channel and guild metadata. (Thanks [@Lucas LaBuff](https://github.com/96-LB))
+- Fixed an issue where the application sometimes crashed with `Invalid snowflake` message when exporting chat logs that contained invalid or outdated mentions. (Thanks [@Lucas LaBuff](https://github.com/96-LB))
+
+### v2.26 (29-Dec-2020)
+
+- [HTML] Added support for replies. (Thanks [@Sanqui](https://github.com/Sanqui))
+- [HTML] Improved styling of non-media attachments (regular files, i.e. not video, audio, or image). (Thanks [@Lucas LaBuff](https://github.com/96-LB))
+- [HTML] Improved initial export performance.
+- [JSON] Relaxed escaping rules for unicode characters. (Thanks [@Sanqui](https://github.com/Sanqui))
+- [JSON] Added support for replies. (Thanks [@Sanqui](https://github.com/Sanqui))
+- [CLI] Added channel names to errors shown on failures when exporting multiple channels. (Thanks [@Sanqui](https://github.com/Sanqui))
+- [CLI] Added support for passing message IDs (snowflakes) to `--after` and `--before` options. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+- Files downloaded by the "download referenced media" option now have their dates set according to the `Last-Modified` header provided by Discord CDN. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+- Fixed an issue where the application sometimes crashed with `NullReferenceException` when retrying a failed HTTP request.
+- Migrated to Discord API v8.
+
+### v2.25 (23-Nov-2020)
+
+- [JSON] Added `mentions` property to the output. This contains users referenced inside the message text, but doesn't include mentions in embeds. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+- [HTML] Added better previews for attached video and audio. They are now rendered using a browser native player element. The actual file path can still be retrieved by right clicking and selecting "Copy file path". (Thanks [@sas41](https://github.com/sas41))
+- [CLI] Fixed an issue where using `--media` option without providing a rooted path via `--output` option triggered an error.
+- [CLI] Fixed an issue where using `--reuse-media` option without also providing `--media` option was accepted, but didn't actually do anything. Now this produces an error instead. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+
+### v2.24 (24-Oct-2020)
+
+- [CLI] Updated to [CliFx v1.5](https://github.com/Tyrrrz/CliFx), which brings some UX improvements.
+- [GUI] Added dark mode, which can be enabled in settings. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+- [GUI] Improved the UX in a few minor places.
+- [JSON] Added `embed.color` property to the output. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+- Added additional date formats: `unix` to write dates as a unix timestamp and `unixms` for the milliseconds version. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+- Added retry policy for downloading media content. This is mostly a workaround for transient failures that sometimes may occur when downloading assets referenced from embeds. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+- Added an option to reuse already downloaded media to avoid redundant network requests. It can be enabled in settings in GUI, or by passing `--reuse-media` in CLI. To facilitate this feature, the file name strategy has been changed as well -- now instead of relying on the original file name and adding `(n)` to the end in case of duplicates, a URL hash is injected in every file name. This also means that when the "reuse media" option is disabled, existing files inside the media directory may be overwritten. (Thanks [@Andrew Kolos](https://github.com/andrewkolos))
+
+### v2.23 (14-Sep-2020)
+
+- [CLI] Added a command to export all channels across all servers. Use `exportall` to do it. (Thanks [@wyattscarpenter](https://github.com/wyattscarpenter))
+- [HTML] Fixed an issue where Whitney fonts were not being loaded properly, causing the browser to fall back to Helvetica.
+- Fixed an issue where self-contained export crashed occasionally. This usually happened when the server hosting the file did not serve the stream properly. Such files are now ignored after the first failed attempt.
+
+### v2.22 (12-Aug-2020)
+
+- [GUI] Improved the channel list by adding collapsible category groups. (Thanks [@CarJem Generations](https://github.com/CarJem))
+- [GUI] Improved exporting options by adding a set of controls that can be used to limit the date range of the export down to minutes. Previously it was only possible to configure the date range without the time component. (Thanks [@CarJem Generations](https://github.com/CarJem))
+- [HTML] Fixed an issue where the export didn't reflect changes in nicknames between messages sent by bots. This affected chat logs that contained interactions with the Tupperbox bot. (Thanks [@CarJem Generations](https://github.com/CarJem))
+- [CLI] Fixed an issue where the application crashed if there were two environment variables defined that had the same name but in different case.
+
+### v2.21.2 (30-Jul-2020)
+
+- [GUI] When copy-pasting token, any surrounding spaces are now discarded, in addition to double quotes.
+- [HTML] Changed underlying templating engine to provide higher performance and better error messages. New templating engine adds a small cold start, but any export after the first should be faster.
+- Changed naming schema for downloaded media so that it follows `<original filename> (nn)` format rather than `<original filename>-salt`.
+- [HTML] Fixed an issue where downloaded media was sometimes inaccessible due to reserved characters appearing in the URL.
+- Fixed an issue where the application crashed when trying to download media with a file name that exceeds system's maximum allowed length.
+- Fixed an issue where the application crashed when trying to download media with illegal characters in the file name.
+
+### v2.21.1 (19-Jul-2020)
+
+- Fixed an issue where the export crashed if an embedded image has been deleted. Such media files are now ignored.
+- Changed the naming convention for downloaded media files so that the original file names are used when possible.
+
+### v2.21 (18-Jul-2020)
+
+- Added a new option that enables self-contained exports for all output formats. You can turn it on in the export setup dialog in GUI or using the `--media` option in CLI. When using this, the application will additionally download any media content directly referenced from the exported file instead of linking back to Discord CDN. The files which are downloaded include: guild icons, user avatars, attachments, embedded images, reaction emoji. Note that only files which are actually referenced by the export are downloaded, which means that, for example, user avatars will not be downloaded when using plain text export format. This option is not meant to enable complete offline viewing for HTML exports, but rather to make it easier to archive media content that may eventually get deleted from Discord servers. Also keep in mind that this option may make the export drastically slower and the total file size larger.
+- Changed "discordapp.com" to "discord.com" where applicable as Discord is migrating to a new domain. CDN will remain on "cdn.discordapp.com" for the foreseeable future.
+
+Note that all existing and current HTML exports will likely not render accurately because Discord enabled CORS for their font resources, which prevents them from loading locally. Please refer to [issue #322](https://github.com/Tyrrrz/DiscordChatExporter/issues/322) for discussion on this topic. 
+
+### v2.20 (27-Apr-2020)
+
+- [CLI] Added environment variables as fallback for `--token` and `--bot` options. They are `DISCORD_TOKEN` and `DISCORD_TOKEN_BOT` respectively.
+- [GUI] Fixed a crash that occurred if the application was closed in the middle of an auto-update.
+- [GUI] Added a link to project's wiki in the usage guide.
+- [HTML] Added full spoiler support for text and images. To spoil the hidden content you now need to click on it, similarly to how it works in Discord. (Thanks [@FM-96](https://github.com/FM-96))
+- [HTML] Updated grammar for consecutive single-line quotes. Previously they appeared separately, now they're grouped together as if it was one multi-line quote instead.
+- [HTML] Fixed an issue where messages sent by the same bot but with different usernames were grouped together when they shouldn't be.
+- [HTML] Updated grammar for single-line code blocks to accept double backticks as synonymous with single backticks. This change makes code blocks appear the same, whether they were inserted manually or using Discord's buggy markdown preview mode.
+- [HTML] Fixed styling inconsistencies and other minor issues.
+- [TXT/JSON] Fixed an issue where markdown was not parsed correctly in embed fields.
+- [HTML] Changed markdown formatting in embeds so it follows the same set of rules as in Discord.
+- Added channel category to the default file name used when exporting chat logs.
+- [HTML/TXT/JSON] Added channel category to exported metadata.
+- [CLI] Updated commands to also show channel category as well as channel name wherever relevant.
+- Starting with this release, Docker images will have new tags: `stable` for latest stable release and `2.20` for a specific version.
+
+### v2.19 (26-Mar-2020)
+
+- Added parallel exporting. This option allows you to export multiple channels faster by doing it in parallel. You can configure the parallel limit in settings (GUI) or with the `--parallel` option (CLI). Default value is `1`, which means there is no parallelization. Warning: be careful when using this option, as this will result in higher volume of concurrent HTTP requests sent to Discord, which might get you flagged. Use at your own risk.
+- [HTML] Added support for user colors. User names are now appropriately colored according to the assigned guild roles.
+- [HTML] Added support for nicknames. User names are replaced with nicknames where it's applicable. It's still possible to see the full user name by hovering your mouse over the nickname.
+- [HTML] Improved styling for mentions to bring it more in line with how it looks in Discord.
+
+### v2.18 (04-Feb-2020)
+
+- Added JSON export format. It's a structured data format which is easy to parse. If you're using DiscordChatExporter to export chat logs for further ingestion by another tool, this is most likely the format you will want to use.
+- [GUI] You can now quickly jump to a specific channel in a list. For example, if you want to jump to a channel named "General", you can simply press the 'g' key in the channel list view. You can also press 'g', 'e' and 'n' in quick succession which will jump to the next channel that starts with "gen". This mechanic is consistent with other Windows applications.
+- [CLI] Improved help text screen.
+
+### v2.17 (12-Jan-2020)
+
+- Fixed an issue where an empty file was produced when exporting a channel with no messages (for specified period). With the new behavior, no file will be created and instead a message will be shown to the user informing of the failure.
+- [HTML/TXT] Added message count to the bottom of the file. This number shows how many messages were exported as part of the current file. Prior to 2.16 this number was present along with the rest of the metadata at the top, then removed due to changes in the exporter, and now brought back at the end of the file instead.
+- [HTML] Fixed an issue where some emoji were not properly rendered.
+- [GUI] Added a setting that lets you configure whether to remember the last used token. Previously it was the default behavior, but now you can disable it if you don't want the token persisted on your system.
+
+### v2.16 (08-Dec-2019)
+
+- Migrated from .NET Framework to .NET Core. To run this and future versions of DiscordChatExporter you will need [.NET Core runtime for desktop apps](https://dotnet.microsoft.com/download/dotnet-core/3.1/runtime) (for GUI/CLI version on Windows) or [.NET Core base runtime](https://dotnet.microsoft.com/download/dotnet-core/3.1) (for CLI version on Windows, Linux or macOS).
+- Reworked the exporter engine to render output using streaming data source. This means that only a very small portion of messages are cached in memory when exporting. In other words, you are only limited by storage space and not how much RAM you have, so you can now export terabytes of chat logs without hitting out of memory exceptions. I still recommend using partitions if you're exporting very large chat logs (250k+ messages) to HTML, unless you want your computer to catch fire when you try to open the export in browser.
+- Changed how partitioned files are named, due to the fact that total number of partitions is no longer known ahead of time.
+- Added a warning about automating user accounts to the usage guide in both GUI and CLI versions.
+- Added support for announcement (news) channels. You will now be able to see them in the list and export them.
+- Fixed various issues that resulted in exceptions during export process.
+- [HTML/TXT] Removed message count from the metadata. Due to the fact that the messages are exported as they are streamed, total number of messages is not known ahead of time.
+- [HTML] Changed default color of the embed color pill to match the theme.
+- [HTML] Changed emoji parser to be less greedy. As a result it should match fewer character sequences that look like emoji but really aren't, but on the other hand it might miss some actual emoji. This means that some standard emoji (i.e. not custom server emoji) may not look like in Discord. This is a compromise I'm willing to take because detecting emoji in text is really hard to get right and not worth it at all.
+- [HTML] Some other minor styling adjustments.
+- [CSV] Replaced semicolons (;) with (,) as separators.
+
+Please note that CSV export is most likely not going to receive future updates and will remain only as an option for those who wish to use it for text analysis. In other words, it won't contain any of the rich media features like embeds. If you're currently using CSV as a structured output to feed into your program, JSON output will replace that in the future.
+
+### v2.15 (15-Sep-2019)
+
+- Improved markdown parser and made it even faster for non-HTML formats.
+- [HTML] Added support for block quotes.
+- [HTML] Links pointing to a Discord message will now navigate to the linked message inside exported chat log if it's there.
+- [HTML] Updated light theme to match how it looks in Discord after recent changes.
+- [HTML] Added indication for when a message is pinned. Pinned messages now have a tinted background.
+- [HTML] Fixed an issue where multiline code blocks sometimes had incorrect formatting applied to them.
+- [TXT] Added indication for when a message is pinned. Pinned messages now have `(pinned)` next to timestamp and author.
+- [CSV] Added message author's user ID to output.
+- [GUI] Streamlined auto-update process a bit.
+- [GUI] Added some tooltips.
+
 ### v2.14 (15-Jun-2019)
 
 - [TXT] Added support for embeds.
@@ -20,8 +279,8 @@
 ### v2.12.1 (12-Apr-2019)
 
 - [GUI] Fixed an issue where the app crashed when trying to export multiple channels.
-- [HTML] Fixed an issue where some of the emojis were rendered via Twemoji while Discord renders them as plain text.
-- [HTML] Fixed an issue where emojis weren't jumbo if there were more than one of them.
+- [HTML] Fixed an issue where some of the emoji were rendered via Twemoji while Discord renders them as plain text.
+- [HTML] Fixed an issue where emoji weren't jumbo if there were more than one of them.
 
 ### v2.12 (11-Apr-2019)
 
@@ -43,15 +302,15 @@
 
 ### v2.10.1 (06-Mar-2019)
 
-- [HTML] Fixed an issue where multiple emojis on a single line would get rendered as one emoji.
+- [HTML] Fixed an issue where multiple emoji on a single line would get rendered as one emoji.
 - [HTML] Fixed an issue where an open square bracket character would incorrectly render as an emoji.
 - [HTML] Added alt text to emoji images so that they will be rendered using default font when Twemoji images are not available.
 
 ### v2.10 (03-Mar-2019)
 
 - [HTML] Reworked the entire markdown parsing engine which fixes numerous rendering inconsistencies (over 15 issues fixed).
-- [HTML] Added support for animated emojis.
-- [HTML] Standard emojis are now rendered using Twemoji, the same image set that Discord uses.
+- [HTML] Added support for animated emoji.
+- [HTML] Standard emoji are now rendered using Twemoji, the same image set that Discord uses.
 - [HTML] Fixed an issue where video attachments would render incorrectly.
 - [HTML] Minor fixes in styling.
 - [GUI] Aggregated export progress is now shown in the taskbar.
@@ -111,7 +370,7 @@
 - Added support for reactions (HTML only).
 - Selected date range is now shown in the export (HTML and PlainText).
 - Added placeholders for guild icons to display while the icons are loading.
-- Added support for jumbo emojis (custom emojis only).
+- Added support for jumbo emoji (custom emoji only).
 - Added basic retry policy for 429 error responses.
 - Added validation for from/to dates in the UI which prevents choosing invalid date ranges.
 - Added an error message when trying to export a deleted channel.
@@ -135,7 +394,7 @@
 
 - Improved message date filtering, it's now marginally faster.
 - Fixed underscores not recognized as italics in markdown.
-- Added support for custom emojis.
+- Added support for custom emoji.
 - Added support for user and role mentions.
 - Added support for channel mentions.
 - Fixed text in pre blocks not being wrapped correctly.

Deploy/Prepare.ps1

@@ -1,21 +0,0 @@
-New-Item "$PSScriptRoot\Portable\bin" -ItemType Directory -Force
-
-# --- GUI ---
-
-# Get files
-$files = @()
-$files += Get-Item -Path "$PSScriptRoot\..\License.txt"
-$files += Get-ChildItem -Path "$PSScriptRoot\..\DiscordChatExporter.Gui\bin\Release\*" -Include "*.exe", "*.dll", "*.config"
-
-# Pack into archive
-$files | Compress-Archive -DestinationPath "$PSScriptRoot\Portable\bin\DiscordChatExporter.zip" -Force
-
-# --- CLI ---
-
-# Get files
-$files = @()
-$files += Get-Item -Path "$PSScriptRoot\..\License.txt"
-$files += Get-ChildItem -Path "$PSScriptRoot\..\DiscordChatExporter.Cli\bin\Release\net46\*" -Include "*.exe", "*.dll", "*.config"
-
-# Pack into archive
-$files | Compress-Archive -DestinationPath "$PSScriptRoot\Portable\bin\DiscordChatExporter.CLI.zip" -Force

Directory.Build.props

@@ -0,0 +1,13 @@
+<Project>
+
+  <PropertyGroup>
+    <TargetFramework>net6.0</TargetFramework>
+    <Version>2.34.1</Version>
+    <Company>Tyrrrz</Company>
+    <Copyright>Copyright (c) Oleksii Holub</Copyright>
+    <LangVersion>preview</LangVersion>
+    <Nullable>enable</Nullable>
+    <WarningsAsErrors>nullable</WarningsAsErrors>
+  </PropertyGroup>
+
+</Project>

DiscordChatExporter.Cli.Tests/DiscordChatExporter.Cli.Tests.csproj

@@ -0,0 +1,30 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+  <PropertyGroup>
+    <IsPackable>false</IsPackable>
+    <IsTestProject>true</IsTestProject>
+    <NoWarn>$(NoWarn);xUnit1013</NoWarn>
+  </PropertyGroup>
+
+  <ItemGroup>
+    <Content Include="xunit.runner.json" CopyToOutputDirectory="PreserveNewest" />
+    <None Include="*.secret" CopyToOutputDirectory="PreserveNewest" />
+  </ItemGroup>
+
+  <ItemGroup>
+    <PackageReference Include="AngleSharp" Version="0.16.1" />
+    <PackageReference Include="FluentAssertions" Version="6.7.0" />
+    <PackageReference Include="GitHubActionsTestLogger" Version="2.0.0" PrivateAssets="all" />
+    <PackageReference Include="JsonExtensions" Version="1.2.0" />
+    <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.2.0" />
+    <PackageReference Include="System.Reactive" Version="5.0.0" />
+    <PackageReference Include="xunit" Version="2.4.1" />
+    <PackageReference Include="xunit.runner.visualstudio" Version="2.4.5" PrivateAssets="all" />
+    <PackageReference Include="coverlet.collector" Version="3.1.2" PrivateAssets="all" />
+  </ItemGroup>
+
+  <ItemGroup>
+    <ProjectReference Include="..\DiscordChatExporter.Cli\DiscordChatExporter.Cli.csproj" />
+  </ItemGroup>
+
+</Project>

DiscordChatExporter.Cli.Tests/Fixtures/ExportWrapperFixture.cs

@@ -0,0 +1,130 @@
+using System;
+using System.Collections.Generic;
+using System.IO;
+using System.Linq;
+using System.Text.Json;
+using System.Threading.Tasks;
+using AngleSharp.Dom;
+using AngleSharp.Html.Dom;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands;
+using DiscordChatExporter.Cli.Tests.Infra;
+using DiscordChatExporter.Cli.Tests.Utils;
+using DiscordChatExporter.Core.Discord;
+using DiscordChatExporter.Core.Exporting;
+using JsonExtensions;
+
+namespace DiscordChatExporter.Cli.Tests.Fixtures;
+
+public class ExportWrapperFixture : IDisposable
+{
+    private string DirPath { get; } = Path.Combine(
+        Path.GetDirectoryName(typeof(ExportWrapperFixture).Assembly.Location) ?? Directory.GetCurrentDirectory(),
+        "ExportCache",
+        Guid.NewGuid().ToString()
+    );
+
+    public ExportWrapperFixture() => DirectoryEx.Reset(DirPath);
+
+    private async ValueTask<string> ExportAsync(Snowflake channelId, ExportFormat format)
+    {
+        var fileName = channelId.ToString() + '.' + format.GetFileExtension();
+        var filePath = Path.Combine(DirPath, fileName);
+
+        // Perform export only if it hasn't been done before
+        if (!File.Exists(filePath))
+        {
+            await new ExportChannelsCommand
+            {
+                Token = Secrets.DiscordToken,
+                ChannelIds = new[] { channelId },
+                ExportFormat = format,
+                OutputPath = filePath
+            }.ExecuteAsync(new FakeConsole());
+        }
+
+        return await File.ReadAllTextAsync(filePath);
+    }
+
+    public async ValueTask<IHtmlDocument> ExportAsHtmlAsync(Snowflake channelId)
+    {
+        var data = await ExportAsync(channelId, ExportFormat.HtmlDark);
+        return Html.Parse(data);
+    }
+
+    public async ValueTask<JsonElement> ExportAsJsonAsync(Snowflake channelId)
+    {
+        var data = await ExportAsync(channelId, ExportFormat.Json);
+        return Json.Parse(data);
+    }
+
+    public async ValueTask<string> ExportAsPlainTextAsync(Snowflake channelId)
+    {
+        var data = await ExportAsync(channelId, ExportFormat.PlainText);
+        return data;
+    }
+
+    public async ValueTask<string> ExportAsCsvAsync(Snowflake channelId)
+    {
+        var data = await ExportAsync(channelId, ExportFormat.Csv);
+        return data;
+    }
+
+    public async ValueTask<IReadOnlyList<IElement>> GetMessagesAsHtmlAsync(Snowflake channelId)
+    {
+        var document = await ExportAsHtmlAsync(channelId);
+        return document.QuerySelectorAll("[data-message-id]").ToArray();
+    }
+
+    public async ValueTask<IReadOnlyList<JsonElement>> GetMessagesAsJsonAsync(Snowflake channelId)
+    {
+        var document = await ExportAsJsonAsync(channelId);
+        return document.GetProperty("messages").EnumerateArray().ToArray();
+    }
+
+    public async ValueTask<IElement> GetMessageAsHtmlAsync(Snowflake channelId, Snowflake messageId)
+    {
+        var messages = await GetMessagesAsHtmlAsync(channelId);
+
+        var message = messages.SingleOrDefault(e =>
+            string.Equals(
+                e.GetAttribute("data-message-id"),
+                messageId.ToString(),
+                StringComparison.OrdinalIgnoreCase
+            )
+        );
+
+        if (message is null)
+        {
+            throw new InvalidOperationException(
+                $"Message '{messageId}' does not exist in export of channel '{channelId}'."
+            );
+        }
+
+        return message;
+    }
+
+    public async ValueTask<JsonElement> GetMessageAsJsonAsync(Snowflake channelId, Snowflake messageId)
+    {
+        var messages = await GetMessagesAsJsonAsync(channelId);
+
+        var message = messages.FirstOrDefault(j =>
+            string.Equals(
+                j.GetProperty("id").GetString(),
+                messageId.ToString(),
+                StringComparison.OrdinalIgnoreCase
+            )
+        );
+
+        if (message.ValueKind == JsonValueKind.Undefined)
+        {
+            throw new InvalidOperationException(
+                $"Message '{messageId}' does not exist in export of channel '{channelId}'."
+            );
+        }
+
+        return message;
+    }
+
+    public void Dispose() => DirectoryEx.DeleteIfExists(DirPath);
+}

DiscordChatExporter.Cli.Tests/Fixtures/TempOutputFixture.cs

@@ -0,0 +1,22 @@
+using System;
+using System.IO;
+using DiscordChatExporter.Cli.Tests.Utils;
+
+namespace DiscordChatExporter.Cli.Tests.Fixtures;
+
+public class TempOutputFixture : IDisposable
+{
+    public string DirPath { get; } = Path.Combine(
+        Path.GetDirectoryName(typeof(TempOutputFixture).Assembly.Location) ?? Directory.GetCurrentDirectory(),
+        "Temp",
+        Guid.NewGuid().ToString()
+    );
+
+    public TempOutputFixture() => DirectoryEx.Reset(DirPath);
+
+    public string GetTempFilePath(string fileName) => Path.Combine(DirPath, fileName);
+
+    public string GetTempFilePath() => GetTempFilePath(Guid.NewGuid() + ".tmp");
+
+    public void Dispose() => DirectoryEx.DeleteIfExists(DirPath);
+}

DiscordChatExporter.Cli.Tests/Infra/Secrets.cs

@@ -0,0 +1,26 @@
+using System;
+using System.IO;
+
+namespace DiscordChatExporter.Cli.Tests.Infra;
+
+internal static class Secrets
+{
+    private static readonly Lazy<string> DiscordTokenLazy = new(() =>
+    {
+        var fromEnvironment = Environment.GetEnvironmentVariable("DISCORD_TOKEN");
+        if (!string.IsNullOrWhiteSpace(fromEnvironment))
+            return fromEnvironment;
+
+        var secretFilePath = Path.Combine(
+            Path.GetDirectoryName(typeof(Secrets).Assembly.Location) ?? Directory.GetCurrentDirectory(),
+            "DiscordToken.secret"
+        );
+
+        if (File.Exists(secretFilePath))
+            return File.ReadAllText(secretFilePath);
+
+        throw new InvalidOperationException("Discord token not provided for tests.");
+    });
+
+    public static string DiscordToken => DiscordTokenLazy.Value;
+}

DiscordChatExporter.Cli.Tests/Readme.md

@@ -0,0 +1,13 @@
+# DiscordChatExporter Tests
+
+This test suite runs against a real Discord server, specifically created to exercise different behaviors required by the test scenarios.
+In order to run these tests locally, you need to join the test server and configure your authentication token.
+
+1. [Join the test server](https://discord.gg/eRV8Vap5bm)
+2. Locate your Discord authentication token
+3. Specify your token using a file or an environment variable:
+    - **Using a file**: put your token in a new `DiscordToken.secret` file created in this directory
+    - **Using an environment variable**: set `DISCORD_TOKEN` variable to your token
+4. Run the tests: `dotnet test`
+
+> If you want to add a new test case, please let me know and I will give you the required permissions

DiscordChatExporter.Cli.Tests/Specs/CsvWriting/ContentSpecs.cs

@@ -0,0 +1,30 @@
+using System.Threading.Tasks;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.CsvWriting;
+
+public record ContentSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Messages_are_exported_correctly()
+    {
+        // Act
+        var document = await ExportWrapper.ExportAsCsvAsync(ChannelIds.DateRangeTestCases);
+
+        // Assert
+        document.Should().ContainAll(
+            "Tyrrrz#5447",
+            "Hello world",
+            "Goodbye world",
+            "Foo bar",
+            "Hurdle Durdle",
+            "One",
+            "Two",
+            "Three",
+            "Yeet"
+        );
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/DateRangeSpecs.cs

@@ -0,0 +1,156 @@
+using System;
+using System.IO;
+using System.Linq;
+using System.Threading.Tasks;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.Infra;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using DiscordChatExporter.Core.Exporting;
+using FluentAssertions;
+using JsonExtensions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs;
+
+public record DateRangeSpecs(TempOutputFixture TempOutput) : IClassFixture<TempOutputFixture>
+{
+    [Fact]
+    public async Task Messages_filtered_after_specific_date_only_include_messages_sent_after_that_date()
+    {
+        // Arrange
+        var after = new DateTimeOffset(2021, 07, 24, 0, 0, 0, TimeSpan.Zero);
+        var filePath = TempOutput.GetTempFilePath();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.DateRangeTestCases },
+            ExportFormat = ExportFormat.Json,
+            OutputPath = filePath,
+            After = Snowflake.FromDate(after)
+        }.ExecuteAsync(new FakeConsole());
+
+        var data = await File.ReadAllTextAsync(filePath);
+        var document = Json.Parse(data);
+
+        var timestamps = document
+            .GetProperty("messages")
+            .EnumerateArray()
+            .Select(j => j.GetProperty("timestamp").GetDateTimeOffset())
+            .ToArray();
+
+        // Assert
+        timestamps.All(t => t > after).Should().BeTrue();
+
+        timestamps.Should().BeEquivalentTo(new[]
+        {
+            new DateTimeOffset(2021, 07, 24, 13, 49, 13, TimeSpan.Zero),
+            new DateTimeOffset(2021, 07, 24, 14, 52, 38, TimeSpan.Zero),
+            new DateTimeOffset(2021, 07, 24, 14, 52, 39, TimeSpan.Zero),
+            new DateTimeOffset(2021, 07, 24, 14, 52, 40, TimeSpan.Zero),
+            new DateTimeOffset(2021, 09, 08, 14, 26, 35, TimeSpan.Zero)
+        }, o =>
+        {
+            return o
+                .Using<DateTimeOffset>(ctx =>
+                    ctx.Subject.Should().BeCloseTo(ctx.Expectation, TimeSpan.FromSeconds(1))
+                )
+                .WhenTypeIs<DateTimeOffset>();
+        });
+    }
+
+    [Fact]
+    public async Task Messages_filtered_before_specific_date_only_include_messages_sent_before_that_date()
+    {
+        // Arrange
+        var before = new DateTimeOffset(2021, 07, 24, 0, 0, 0, TimeSpan.Zero);
+        var filePath = TempOutput.GetTempFilePath();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.DateRangeTestCases },
+            ExportFormat = ExportFormat.Json,
+            OutputPath = filePath,
+            Before = Snowflake.FromDate(before)
+        }.ExecuteAsync(new FakeConsole());
+
+        var data = await File.ReadAllTextAsync(filePath);
+        var document = Json.Parse(data);
+
+        var timestamps = document
+            .GetProperty("messages")
+            .EnumerateArray()
+            .Select(j => j.GetProperty("timestamp").GetDateTimeOffset())
+            .ToArray();
+
+        // Assert
+        timestamps.All(t => t < before).Should().BeTrue();
+
+        timestamps.Should().BeEquivalentTo(new[]
+        {
+            new DateTimeOffset(2021, 07, 19, 13, 34, 18, TimeSpan.Zero),
+            new DateTimeOffset(2021, 07, 19, 15, 58, 48, TimeSpan.Zero),
+            new DateTimeOffset(2021, 07, 19, 17, 23, 58, TimeSpan.Zero)
+        }, o =>
+        {
+            return o
+                .Using<DateTimeOffset>(ctx =>
+                    ctx.Subject.Should().BeCloseTo(ctx.Expectation, TimeSpan.FromSeconds(1))
+                )
+                .WhenTypeIs<DateTimeOffset>();
+        });
+    }
+
+    [Fact]
+    public async Task Messages_filtered_between_specific_dates_only_include_messages_sent_between_those_dates()
+    {
+        // Arrange
+        var after = new DateTimeOffset(2021, 07, 24, 0, 0, 0, TimeSpan.Zero);
+        var before = new DateTimeOffset(2021, 08, 01, 0, 0, 0, TimeSpan.Zero);
+        var filePath = TempOutput.GetTempFilePath();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.DateRangeTestCases },
+            ExportFormat = ExportFormat.Json,
+            OutputPath = filePath,
+            Before = Snowflake.FromDate(before),
+            After = Snowflake.FromDate(after)
+        }.ExecuteAsync(new FakeConsole());
+
+        var data = await File.ReadAllTextAsync(filePath);
+        var document = Json.Parse(data);
+
+        var timestamps = document
+            .GetProperty("messages")
+            .EnumerateArray()
+            .Select(j => j.GetProperty("timestamp").GetDateTimeOffset())
+            .ToArray();
+
+        // Assert
+        timestamps.All(t => t < before && t > after).Should().BeTrue();
+
+        timestamps.Should().BeEquivalentTo(new[]
+        {
+            new DateTimeOffset(2021, 07, 24, 13, 49, 13, TimeSpan.Zero),
+            new DateTimeOffset(2021, 07, 24, 14, 52, 38, TimeSpan.Zero),
+            new DateTimeOffset(2021, 07, 24, 14, 52, 39, TimeSpan.Zero),
+            new DateTimeOffset(2021, 07, 24, 14, 52, 40, TimeSpan.Zero)
+        }, o =>
+        {
+            return o
+                .Using<DateTimeOffset>(ctx =>
+                    ctx.Subject.Should().BeCloseTo(ctx.Expectation, TimeSpan.FromSeconds(1))
+                )
+                .WhenTypeIs<DateTimeOffset>();
+        });
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/FilterSpecs.cs

@@ -0,0 +1,158 @@
+using System.IO;
+using System.Linq;
+using System.Threading.Tasks;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.Infra;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Exporting;
+using DiscordChatExporter.Core.Exporting.Filtering;
+using FluentAssertions;
+using JsonExtensions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs;
+
+public record FilterSpecs(TempOutputFixture TempOutput) : IClassFixture<TempOutputFixture>
+{
+    [Fact]
+    public async Task Messages_filtered_by_text_only_include_messages_that_contain_that_text()
+    {
+        // Arrange
+        var filePath = TempOutput.GetTempFilePath();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.FilterTestCases },
+            ExportFormat = ExportFormat.Json,
+            OutputPath = filePath,
+            MessageFilter = MessageFilter.Parse("some text")
+        }.ExecuteAsync(new FakeConsole());
+
+        var data = await File.ReadAllTextAsync(filePath);
+        var document = Json.Parse(data);
+
+        // Assert
+        document
+            .GetProperty("messages")
+            .EnumerateArray()
+            .Select(j => j.GetProperty("content").GetString())
+            .Should()
+            .ContainSingle("Some random text");
+    }
+
+    [Fact]
+    public async Task Messages_filtered_by_author_only_include_messages_sent_by_that_author()
+    {
+        // Arrange
+        var filePath = TempOutput.GetTempFilePath();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.FilterTestCases },
+            ExportFormat = ExportFormat.Json,
+            OutputPath = filePath,
+            MessageFilter = MessageFilter.Parse("from:Tyrrrz")
+        }.ExecuteAsync(new FakeConsole());
+
+        var data = await File.ReadAllTextAsync(filePath);
+        var document = Json.Parse(data);
+
+        // Assert
+        document
+            .GetProperty("messages")
+            .EnumerateArray()
+            .Select(j => j.GetProperty("author").GetProperty("name").GetString())
+            .Should()
+            .AllBe("Tyrrrz");
+    }
+
+    [Fact]
+    public async Task Messages_filtered_by_content_only_include_messages_that_have_that_content()
+    {
+        // Arrange
+        var filePath = TempOutput.GetTempFilePath();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.FilterTestCases },
+            ExportFormat = ExportFormat.Json,
+            OutputPath = filePath,
+            MessageFilter = MessageFilter.Parse("has:image")
+        }.ExecuteAsync(new FakeConsole());
+
+        var data = await File.ReadAllTextAsync(filePath);
+        var document = Json.Parse(data);
+
+        // Assert
+        document
+            .GetProperty("messages")
+            .EnumerateArray()
+            .Select(j => j.GetProperty("content").GetString())
+            .Should()
+            .ContainSingle("This has image");
+    }
+
+    [Fact]
+    public async Task Messages_filtered_by_pin_only_include_messages_that_have_been_pinned()
+    {
+        // Arrange
+        var filePath = TempOutput.GetTempFilePath();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.FilterTestCases },
+            ExportFormat = ExportFormat.Json,
+            OutputPath = filePath,
+            MessageFilter = MessageFilter.Parse("has:pin")
+        }.ExecuteAsync(new FakeConsole());
+
+        var data = await File.ReadAllTextAsync(filePath);
+        var document = Json.Parse(data);
+
+        // Assert
+        document
+            .GetProperty("messages")
+            .EnumerateArray()
+            .Select(j => j.GetProperty("content").GetString())
+            .Should()
+            .ContainSingle("This is pinned");
+    }
+
+    [Fact]
+    public async Task Messages_filtered_by_mention_only_include_messages_that_have_that_mention()
+    {
+        // Arrange
+        var filePath = TempOutput.GetTempFilePath();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.FilterTestCases },
+            ExportFormat = ExportFormat.Json,
+            OutputPath = filePath,
+            MessageFilter = MessageFilter.Parse("mentions:Tyrrrz")
+        }.ExecuteAsync(new FakeConsole());
+
+        var data = await File.ReadAllTextAsync(filePath);
+        var document = Json.Parse(data);
+
+        // Assert
+        document
+            .GetProperty("messages")
+            .EnumerateArray()
+            .Select(j => j.GetProperty("content").GetString())
+            .Should()
+            .ContainSingle("This has mention");
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/HtmlWriting/AttachmentSpecs.cs

@@ -0,0 +1,92 @@
+using System.Threading.Tasks;
+using AngleSharp.Dom;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.HtmlWriting;
+
+public record AttachmentSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Message_with_a_generic_attachment_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.AttachmentTestCases,
+            Snowflake.Parse("885587844989612074")
+        );
+
+        var fileUrl = message.QuerySelector("a")?.GetAttribute("href");
+
+        // Assert
+        message.Text().Should().ContainAll(
+            "Generic file attachment",
+            "Test.txt",
+            "11 bytes"
+        );
+
+        fileUrl.Should().StartWithEquivalentOf(
+            "https://cdn.discordapp.com/attachments/885587741654536192/885587844964417596/Test.txt"
+        );
+    }
+
+    [Fact]
+    public async Task Message_with_an_image_attachment_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.AttachmentTestCases,
+            Snowflake.Parse("885654862656843786")
+        );
+
+        var imageUrl = message.QuerySelector(".chatlog__attachment img")?.GetAttribute("src");
+
+        // Assert
+        message.Text().Should().Contain("Image attachment");
+
+        imageUrl.Should().StartWithEquivalentOf(
+            "https://cdn.discordapp.com/attachments/885587741654536192/885654862430359613/bird-thumbnail.png"
+        );
+    }
+
+    [Fact]
+    public async Task Message_with_a_video_attachment_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.AttachmentTestCases,
+            Snowflake.Parse("885655761919836171")
+        );
+
+        var videoUrl = message.QuerySelector("video source")?.GetAttribute("src");
+
+        // Assert
+        message.Text().Should().Contain("Video attachment");
+
+        videoUrl.Should().StartWithEquivalentOf(
+            "https://cdn.discordapp.com/attachments/885587741654536192/885655761512968233/file_example_MP4_640_3MG.mp4"
+        );
+    }
+
+    [Fact]
+    public async Task Message_with_an_audio_attachment_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.AttachmentTestCases,
+            Snowflake.Parse("885656175620808734")
+        );
+
+        var audioUrl = message.QuerySelector("audio source")?.GetAttribute("src");
+
+        // Assert
+        message.Text().Should().Contain("Audio attachment");
+
+        audioUrl.Should().StartWithEquivalentOf(
+            "https://cdn.discordapp.com/attachments/885587741654536192/885656175348187146/file_example_MP3_1MG.mp3"
+        );
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/HtmlWriting/ContentSpecs.cs

@@ -0,0 +1,42 @@
+using System.Linq;
+using System.Threading.Tasks;
+using AngleSharp.Dom;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.HtmlWriting;
+
+public record ContentSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Messages_are_exported_correctly()
+    {
+        // Act
+        var messages = await ExportWrapper.GetMessagesAsHtmlAsync(ChannelIds.DateRangeTestCases);
+
+        // Assert
+        messages.Select(e => e.GetAttribute("data-message-id")).Should().Equal(
+            "866674314627121232",
+            "866710679758045195",
+            "866732113319428096",
+            "868490009366396958",
+            "868505966528835604",
+            "868505969821364245",
+            "868505973294268457",
+            "885169254029213696"
+        );
+
+        messages.Select(e => e.QuerySelector(".chatlog__content")?.Text().Trim()).Should().Equal(
+            "Hello world",
+            "Goodbye world",
+            "Foo bar",
+            "Hurdle Durdle",
+            "One",
+            "Two",
+            "Three",
+            "Yeet"
+        );
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/HtmlWriting/EmbedSpecs.cs

@@ -0,0 +1,63 @@
+using System.Threading.Tasks;
+using AngleSharp.Dom;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.HtmlWriting;
+
+public record EmbedSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Message_with_an_embed_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.EmbedTestCases,
+            Snowflake.Parse("866769910729146400")
+        );
+
+        // Assert
+        message.Text().Should().ContainAll(
+            "Embed author",
+            "Embed title",
+            "Embed description",
+            "Field 1", "Value 1",
+            "Field 2", "Value 2",
+            "Field 3", "Value 3",
+            "Embed footer"
+        );
+    }
+
+    [Fact]
+    public async Task Message_with_a_Spotify_track_is_rendered_using_an_iframe()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.EmbedTestCases,
+            Snowflake.Parse("867886632203976775")
+        );
+
+        var iframeSrc = message.QuerySelector("iframe")?.GetAttribute("src");
+
+        // Assert
+        iframeSrc.Should().StartWithEquivalentOf("https://open.spotify.com/embed/track/1LHZMWefF9502NPfArRfvP");
+    }
+
+    [Fact]
+    public async Task Message_with_a_YouTube_video_is_rendered_using_an_iframe()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.EmbedTestCases,
+            Snowflake.Parse("866472508588294165")
+        );
+
+        var iframeSrc = message.QuerySelector("iframe")?.GetAttribute("src");
+
+        // Assert
+        iframeSrc.Should().StartWithEquivalentOf("https://www.youtube.com/embed/qOWW4OlgbvE");
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/HtmlWriting/MentionSpecs.cs

@@ -0,0 +1,65 @@
+using System.Threading.Tasks;
+using AngleSharp.Dom;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.HtmlWriting;
+
+public record MentionSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task User_mention_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.MentionTestCases,
+            Snowflake.Parse("866458840245076028")
+        );
+
+        // Assert
+        message.Text().Trim().Should().Contain("User mention: @Tyrrrz");
+        message.InnerHtml.Should().Contain("Tyrrrz#5447");
+    }
+
+    [Fact]
+    public async Task Text_channel_mention_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.MentionTestCases,
+            Snowflake.Parse("866459040480624680")
+        );
+
+        // Assert
+        message.Text().Trim().Should().Contain("Text channel mention: #mention-tests");
+    }
+
+    [Fact]
+    public async Task Voice_channel_mention_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.MentionTestCases,
+            Snowflake.Parse("866459175462633503")
+        );
+
+        // Assert
+        message.Text().Trim().Should().Contain("Voice channel mention: 🔊chaos-vc");
+    }
+
+    [Fact]
+    public async Task Role_mention_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.MentionTestCases,
+            Snowflake.Parse("866459254693429258")
+        );
+
+        // Assert
+        message.Text().Trim().Should().Contain("Role mention: @Role 1");
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/HtmlWriting/ReplySpecs.cs

@@ -0,0 +1,56 @@
+using System.Threading.Tasks;
+using AngleSharp.Dom;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.HtmlWriting;
+
+public record ReplySpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Reply_to_a_normal_message_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.ReplyTestCases,
+            Snowflake.Parse("866460738239725598")
+        );
+
+        // Assert
+        message.Text().Trim().Should().Contain("reply to original");
+        message.QuerySelector(".chatlog__reference-link")?.Text().Trim().Should().Contain("original");
+    }
+
+    [Fact]
+    public async Task Reply_to_a_deleted_message_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.ReplyTestCases,
+            Snowflake.Parse("866460975388819486")
+        );
+
+        // Assert
+        message.Text().Trim().Should().Contain("reply to deleted");
+        message.QuerySelector(".chatlog__reference-link")?.Text().Trim().Should()
+            .Contain("Original message was deleted or could not be loaded.");
+    }
+
+    [Fact]
+    public async Task Reply_to_an_empty_message_with_attachment_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.ReplyTestCases,
+            Snowflake.Parse("866462470335627294")
+        );
+
+        // Assert
+        message.Text().Trim().Should().Contain("reply to attachment");
+        message.QuerySelector(".chatlog__reference-link")?.Text().Trim().Should()
+            .Contain("Click to see attachment");
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/HtmlWriting/StickerSpecs.cs

@@ -0,0 +1,45 @@
+using System.Threading.Tasks;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.HtmlWriting;
+
+public record StickerSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Message_with_a_PNG_based_sticker_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.StickerTestCases,
+            Snowflake.Parse("939670623158943754")
+        );
+
+        var container = message.QuerySelector("[title='rock']");
+        var sourceUrl = container?.QuerySelector("img")?.GetAttribute("src");
+
+        // Assert
+        container.Should().NotBeNull();
+        sourceUrl.Should().Be("https://discord.com/stickers/904215665597120572.png");
+    }
+
+    [Fact]
+    public async Task Message_with_a_Lottie_based_sticker_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsHtmlAsync(
+            ChannelIds.StickerTestCases,
+            Snowflake.Parse("939670526517997590")
+        );
+
+        var container = message.QuerySelector("[title='Yikes']");
+        var sourceUrl = container?.QuerySelector("div[data-source]")?.GetAttribute("data-source");
+
+        // Assert
+        container.Should().NotBeNull();
+        sourceUrl.Should().Be("https://discord.com/stickers/816087132447178774.json");
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/JsonWriting/AttachmentSpecs.cs

@@ -0,0 +1,100 @@
+using System.Linq;
+using System.Threading.Tasks;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.JsonWriting;
+
+public record AttachmentSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Message_with_a_generic_attachment_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.AttachmentTestCases,
+            Snowflake.Parse("885587844989612074")
+        );
+
+        var attachments = message.GetProperty("attachments").EnumerateArray().ToArray();
+
+        // Assert
+        message.GetProperty("content").GetString().Should().Be("Generic file attachment");
+
+        attachments.Should().HaveCount(1);
+        attachments.Single().GetProperty("url").GetString().Should().StartWithEquivalentOf(
+            "https://cdn.discordapp.com/attachments/885587741654536192/885587844964417596/Test.txt"
+        );
+        attachments.Single().GetProperty("fileName").GetString().Should().Be("Test.txt");
+        attachments.Single().GetProperty("fileSizeBytes").GetInt64().Should().Be(11);
+    }
+
+    [Fact]
+    public async Task Message_with_an_image_attachment_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.AttachmentTestCases,
+            Snowflake.Parse("885654862656843786")
+        );
+
+        var attachments = message.GetProperty("attachments").EnumerateArray().ToArray();
+
+        // Assert
+        message.GetProperty("content").GetString().Should().Be("Image attachment");
+
+        attachments.Should().HaveCount(1);
+        attachments.Single().GetProperty("url").GetString().Should().StartWithEquivalentOf(
+            "https://cdn.discordapp.com/attachments/885587741654536192/885654862430359613/bird-thumbnail.png"
+        );
+        attachments.Single().GetProperty("fileName").GetString().Should().Be("bird-thumbnail.png");
+        attachments.Single().GetProperty("fileSizeBytes").GetInt64().Should().Be(466335);
+    }
+
+    [Fact]
+    public async Task Message_with_a_video_attachment_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.AttachmentTestCases,
+            Snowflake.Parse("885655761919836171")
+        );
+
+        var attachments = message.GetProperty("attachments").EnumerateArray().ToArray();
+
+        // Assert
+        message.GetProperty("content").GetString().Should().Be("Video attachment");
+
+        attachments.Should().HaveCount(1);
+        attachments.Single().GetProperty("url").GetString().Should().StartWithEquivalentOf(
+            "https://cdn.discordapp.com/attachments/885587741654536192/885655761512968233/file_example_MP4_640_3MG.mp4"
+        );
+        attachments.Single().GetProperty("fileName").GetString().Should().Be("file_example_MP4_640_3MG.mp4");
+        attachments.Single().GetProperty("fileSizeBytes").GetInt64().Should().Be(3114374);
+    }
+
+    [Fact]
+    public async Task Message_with_an_audio_attachment_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.AttachmentTestCases,
+            Snowflake.Parse("885656175620808734")
+        );
+
+        var attachments = message.GetProperty("attachments").EnumerateArray().ToArray();
+
+        // Assert
+        message.GetProperty("content").GetString().Should().Be("Audio attachment");
+
+        attachments.Should().HaveCount(1);
+        attachments.Single().GetProperty("url").GetString().Should().StartWithEquivalentOf(
+            "https://cdn.discordapp.com/attachments/885587741654536192/885656175348187146/file_example_MP3_1MG.mp3"
+        );
+        attachments.Single().GetProperty("fileName").GetString().Should().Be("file_example_MP3_1MG.mp3");
+        attachments.Single().GetProperty("fileSizeBytes").GetInt64().Should().Be(1087849);
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/JsonWriting/ContentSpecs.cs

@@ -0,0 +1,41 @@
+using System.Linq;
+using System.Threading.Tasks;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.JsonWriting;
+
+public record ContentSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Messages_are_exported_correctly()
+    {
+        // Act
+        var messages = await ExportWrapper.GetMessagesAsJsonAsync(ChannelIds.DateRangeTestCases);
+
+        // Assert
+        messages.Select(j => j.GetProperty("id").GetString()).Should().Equal(
+            "866674314627121232",
+            "866710679758045195",
+            "866732113319428096",
+            "868490009366396958",
+            "868505966528835604",
+            "868505969821364245",
+            "868505973294268457",
+            "885169254029213696"
+        );
+
+        messages.Select(j => j.GetProperty("content").GetString()).Should().Equal(
+            "Hello world",
+            "Goodbye world",
+            "Foo bar",
+            "Hurdle Durdle",
+            "One",
+            "Two",
+            "Three",
+            "Yeet"
+        );
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/JsonWriting/EmbedSpecs.cs

@@ -0,0 +1,57 @@
+using System.Linq;
+using System.Threading.Tasks;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.JsonWriting;
+
+public record EmbedSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Message_with_an_embed_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.EmbedTestCases,
+            Snowflake.Parse("866769910729146400")
+        );
+
+        var embed = message
+            .GetProperty("embeds")
+            .EnumerateArray()
+            .Single();
+
+        var embedAuthor = embed.GetProperty("author");
+        var embedThumbnail = embed.GetProperty("thumbnail");
+        var embedFooter = embed.GetProperty("footer");
+        var embedFields = embed.GetProperty("fields").EnumerateArray().ToArray();
+
+        // Assert
+        embed.GetProperty("title").GetString().Should().Be("Embed title");
+        embed.GetProperty("url").GetString().Should().Be("https://example.com");
+        embed.GetProperty("timestamp").GetString().Should().Be("2021-07-14T21:00:00+00:00");
+        embed.GetProperty("description").GetString().Should().Be("**Embed** _description_");
+        embed.GetProperty("color").GetString().Should().Be("#58B9FF");
+        embedAuthor.GetProperty("name").GetString().Should().Be("Embed author");
+        embedAuthor.GetProperty("url").GetString().Should().Be("https://example.com/author");
+        embedAuthor.GetProperty("iconUrl").GetString().Should().NotBeNullOrWhiteSpace();
+        embedThumbnail.GetProperty("url").GetString().Should().NotBeNullOrWhiteSpace();
+        embedThumbnail.GetProperty("width").GetInt32().Should().Be(120);
+        embedThumbnail.GetProperty("height").GetInt32().Should().Be(120);
+        embedFooter.GetProperty("text").GetString().Should().Be("Embed footer");
+        embedFooter.GetProperty("iconUrl").GetString().Should().NotBeNullOrWhiteSpace();
+        embedFields.Should().HaveCount(3);
+        embedFields[0].GetProperty("name").GetString().Should().Be("Field 1");
+        embedFields[0].GetProperty("value").GetString().Should().Be("Value 1");
+        embedFields[0].GetProperty("isInline").GetBoolean().Should().BeTrue();
+        embedFields[1].GetProperty("name").GetString().Should().Be("Field 2");
+        embedFields[1].GetProperty("value").GetString().Should().Be("Value 2");
+        embedFields[1].GetProperty("isInline").GetBoolean().Should().BeTrue();
+        embedFields[2].GetProperty("name").GetString().Should().Be("Field 3");
+        embedFields[2].GetProperty("value").GetString().Should().Be("Value 3");
+        embedFields[2].GetProperty("isInline").GetBoolean().Should().BeTrue();
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/JsonWriting/MentionSpecs.cs

@@ -0,0 +1,70 @@
+using System.Linq;
+using System.Threading.Tasks;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.JsonWriting;
+
+public record MentionSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task User_mention_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.MentionTestCases,
+            Snowflake.Parse("866458840245076028")
+        );
+
+        // Assert
+        message.GetProperty("content").GetString().Should().Be("User mention: @Tyrrrz");
+
+        message
+            .GetProperty("mentions")
+            .EnumerateArray()
+            .Select(j => j.GetProperty("id").GetString())
+            .Should().Contain("128178626683338752");
+    }
+
+    [Fact]
+    public async Task Text_channel_mention_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.MentionTestCases,
+            Snowflake.Parse("866459040480624680")
+        );
+
+        // Assert
+        message.GetProperty("content").GetString().Should().Be("Text channel mention: #mention-tests");
+    }
+
+    [Fact]
+    public async Task Voice_channel_mention_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.MentionTestCases,
+            Snowflake.Parse("866459175462633503")
+        );
+
+        // Assert
+        message.GetProperty("content").GetString().Should().Be("Voice channel mention: #chaos-vc [voice]");
+    }
+
+    [Fact]
+    public async Task Role_mention_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.MentionTestCases,
+            Snowflake.Parse("866459254693429258")
+        );
+
+        // Assert
+        message.GetProperty("content").GetString().Should().Be("Role mention: @Role 1");
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/JsonWriting/StickerSpecs.cs

@@ -0,0 +1,54 @@
+using System.Linq;
+using System.Threading.Tasks;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Discord;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.JsonWriting;
+
+public record StickerSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Message_with_a_PNG_based_sticker_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.StickerTestCases,
+            Snowflake.Parse("939670623158943754")
+        );
+
+        var sticker = message
+            .GetProperty("stickers")
+            .EnumerateArray()
+            .Single();
+
+        // Assert
+        sticker.GetProperty("id").GetString().Should().Be("904215665597120572");
+        sticker.GetProperty("name").GetString().Should().Be("rock");
+        sticker.GetProperty("format").GetString().Should().Be("PngAnimated");
+        sticker.GetProperty("sourceUrl").GetString().Should().Be("https://discord.com/stickers/904215665597120572.png");
+    }
+
+    [Fact]
+    public async Task Message_with_a_Lottie_based_sticker_is_rendered_correctly()
+    {
+        // Act
+        var message = await ExportWrapper.GetMessageAsJsonAsync(
+            ChannelIds.StickerTestCases,
+            Snowflake.Parse("939670526517997590")
+        );
+
+        var sticker = message
+            .GetProperty("stickers")
+            .EnumerateArray()
+            .Single();
+
+        // Assert
+        sticker.GetProperty("id").GetString().Should().Be("816087132447178774");
+        sticker.GetProperty("name").GetString().Should().Be("Yikes");
+        sticker.GetProperty("format").GetString().Should().Be("Lottie");
+        sticker.GetProperty("sourceUrl").GetString().Should().Be("https://discord.com/stickers/816087132447178774.json");
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/PartitioningSpecs.cs

@@ -0,0 +1,64 @@
+using System.IO;
+using System.Threading.Tasks;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.Infra;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Core.Exporting;
+using DiscordChatExporter.Core.Exporting.Partitioning;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs;
+
+public record PartitioningSpecs(TempOutputFixture TempOutput) : IClassFixture<TempOutputFixture>
+{
+    [Fact]
+    public async Task Messages_partitioned_by_count_are_split_into_multiple_files_correctly()
+    {
+        // Arrange
+        var filePath = TempOutput.GetTempFilePath();
+        var fileNameWithoutExt = Path.GetFileNameWithoutExtension(filePath);
+        var dirPath = Path.GetDirectoryName(filePath) ?? Directory.GetCurrentDirectory();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.DateRangeTestCases },
+            ExportFormat = ExportFormat.HtmlDark,
+            OutputPath = filePath,
+            PartitionLimit = PartitionLimit.Parse("3")
+        }.ExecuteAsync(new FakeConsole());
+
+        // Assert
+        Directory.EnumerateFiles(dirPath, fileNameWithoutExt + "*")
+            .Should()
+            .HaveCount(3);
+    }
+
+    [Fact]
+    public async Task Messages_partitioned_by_file_size_are_split_into_multiple_files_correctly()
+    {
+        // Arrange
+        var filePath = TempOutput.GetTempFilePath();
+        var fileNameWithoutExt = Path.GetFileNameWithoutExtension(filePath);
+        var dirPath = Path.GetDirectoryName(filePath) ?? Directory.GetCurrentDirectory();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.DateRangeTestCases },
+            ExportFormat = ExportFormat.HtmlDark,
+            OutputPath = filePath,
+            PartitionLimit = PartitionLimit.Parse("20kb")
+        }.ExecuteAsync(new FakeConsole());
+
+        // Assert
+        Directory.EnumerateFiles(dirPath, fileNameWithoutExt + "*")
+            .Should()
+            .HaveCount(8);
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/PlainTextWriting/ContentSpecs.cs

@@ -0,0 +1,30 @@
+using System.Threading.Tasks;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.TestData;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs.PlainTextWriting;
+
+public record ContentSpecs(ExportWrapperFixture ExportWrapper) : IClassFixture<ExportWrapperFixture>
+{
+    [Fact]
+    public async Task Messages_are_exported_correctly()
+    {
+        // Act
+        var document = await ExportWrapper.ExportAsPlainTextAsync(ChannelIds.DateRangeTestCases);
+
+        // Assert
+        document.Should().ContainAll(
+            "Tyrrrz#5447",
+            "Hello world",
+            "Goodbye world",
+            "Foo bar",
+            "Hurdle Durdle",
+            "One",
+            "Two",
+            "Three",
+            "Yeet"
+        );
+    }
+}

DiscordChatExporter.Cli.Tests/Specs/SelfContainedSpecs.cs

@@ -0,0 +1,47 @@
+using System.IO;
+using System.Linq;
+using System.Threading.Tasks;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands;
+using DiscordChatExporter.Cli.Tests.Fixtures;
+using DiscordChatExporter.Cli.Tests.Infra;
+using DiscordChatExporter.Cli.Tests.TestData;
+using DiscordChatExporter.Cli.Tests.Utils;
+using DiscordChatExporter.Core.Exporting;
+using FluentAssertions;
+using Xunit;
+
+namespace DiscordChatExporter.Cli.Tests.Specs;
+
+public record SelfContainedSpecs(TempOutputFixture TempOutput) : IClassFixture<TempOutputFixture>
+{
+    [Fact]
+    public async Task Messages_in_self_contained_export_only_reference_local_file_resources()
+    {
+        // Arrange
+        var filePath = TempOutput.GetTempFilePath();
+        var dirPath = Path.GetDirectoryName(filePath) ?? Directory.GetCurrentDirectory();
+
+        // Act
+        await new ExportChannelsCommand
+        {
+            Token = Secrets.DiscordToken,
+            ChannelIds = new[] { ChannelIds.SelfContainedTestCases },
+            ExportFormat = ExportFormat.HtmlDark,
+            OutputPath = filePath,
+            ShouldDownloadMedia = true
+        }.ExecuteAsync(new FakeConsole());
+
+        var data = await File.ReadAllTextAsync(filePath);
+        var document = Html.Parse(data);
+
+        // Assert
+        document
+            .QuerySelectorAll("body [src]")
+            .Select(e => e.GetAttribute("src")!)
+            .Select(f => Path.GetFullPath(f, dirPath))
+            .All(File.Exists)
+            .Should()
+            .BeTrue();
+    }
+}

DiscordChatExporter.Cli.Tests/TestData/ChannelIds.cs

@@ -0,0 +1,22 @@
+using DiscordChatExporter.Core.Discord;
+
+namespace DiscordChatExporter.Cli.Tests.TestData;
+
+public static class ChannelIds
+{
+    public static Snowflake AttachmentTestCases { get; } = Snowflake.Parse("885587741654536192");
+
+    public static Snowflake DateRangeTestCases { get; } = Snowflake.Parse("866674248747319326");
+
+    public static Snowflake EmbedTestCases { get; } = Snowflake.Parse("866472452459462687");
+
+    public static Snowflake StickerTestCases { get; } = Snowflake.Parse("939668868253769729");
+
+    public static Snowflake FilterTestCases { get; } = Snowflake.Parse("866744075033641020");
+
+    public static Snowflake MentionTestCases { get; } = Snowflake.Parse("866458801389174794");
+
+    public static Snowflake ReplyTestCases { get; } = Snowflake.Parse("866459871934677052");
+
+    public static Snowflake SelfContainedTestCases { get; } = Snowflake.Parse("887441432678379560");
+}

DiscordChatExporter.Cli.Tests/Utils/DirectoryEx.cs

@@ -0,0 +1,23 @@
+using System.IO;
+
+namespace DiscordChatExporter.Cli.Tests.Utils;
+
+internal static class DirectoryEx
+{
+    public static void DeleteIfExists(string dirPath, bool recursive = true)
+    {
+        try
+        {
+            Directory.Delete(dirPath, recursive);
+        }
+        catch (DirectoryNotFoundException)
+        {
+        }
+    }
+
+    public static void Reset(string dirPath)
+    {
+        DeleteIfExists(dirPath);
+        Directory.CreateDirectory(dirPath);
+    }
+}

DiscordChatExporter.Cli.Tests/Utils/Html.cs

@@ -0,0 +1,11 @@
+using AngleSharp.Html.Dom;
+using AngleSharp.Html.Parser;
+
+namespace DiscordChatExporter.Cli.Tests.Utils;
+
+internal static class Html
+{
+    private static readonly IHtmlParser Parser = new HtmlParser();
+
+    public static IHtmlDocument Parse(string source) => Parser.ParseDocument(source);
+}

DiscordChatExporter.Cli.Tests/xunit.runner.json

@@ -0,0 +1,5 @@
+{
+  "$schema": "https://xunit.net/schema/current/xunit.runner.schema.json",
+  "methodDisplayOptions": "all",
+  "methodDisplay": "method"
+}

DiscordChatExporter.Cli/Commands/Base/ExportCommandBase.cs

@@ -0,0 +1,181 @@
+using System;
+using System.Collections.Concurrent;
+using System.Collections.Generic;
+using System.IO;
+using System.Linq;
+using System.Threading.Tasks;
+using CliFx.Attributes;
+using CliFx.Exceptions;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Utils.Extensions;
+using DiscordChatExporter.Core.Discord;
+using DiscordChatExporter.Core.Discord.Data;
+using DiscordChatExporter.Core.Exceptions;
+using DiscordChatExporter.Core.Exporting;
+using DiscordChatExporter.Core.Exporting.Filtering;
+using DiscordChatExporter.Core.Exporting.Partitioning;
+using Gress;
+
+namespace DiscordChatExporter.Cli.Commands.Base;
+
+public abstract class ExportCommandBase : TokenCommandBase
+{
+    [CommandOption("output", 'o', Description = "Output file or directory path.")]
+    public string OutputPath { get; init; } = Directory.GetCurrentDirectory();
+
+    [CommandOption("format", 'f', Description = "Export format.")]
+    public ExportFormat ExportFormat { get; init; } = ExportFormat.HtmlDark;
+
+    [CommandOption("after", Description = "Only include messages sent after this date or message ID.")]
+    public Snowflake? After { get; init; }
+
+    [CommandOption("before", Description = "Only include messages sent before this date or message ID.")]
+    public Snowflake? Before { get; init; }
+
+    [CommandOption("partition", 'p', Description = "Split output into partitions, each limited to this number of messages (e.g. '100') or file size (e.g. '10mb').")]
+    public PartitionLimit PartitionLimit { get; init; } = PartitionLimit.Null;
+
+    [CommandOption("filter", Description = "Only include messages that satisfy this filter (e.g. 'from:foo#1234' or 'has:image').")]
+    public MessageFilter MessageFilter { get; init; } = MessageFilter.Null;
+
+    [CommandOption("parallel", Description = "Limits how many channels can be exported in parallel.")]
+    public int ParallelLimit { get; init; } = 1;
+
+    [CommandOption("media", Description = "Download referenced media content.")]
+    public bool ShouldDownloadMedia { get; init; }
+
+    [CommandOption("reuse-media", Description = "Reuse already existing media content to skip redundant downloads.")]
+    public bool ShouldReuseMedia { get; init; }
+
+    [CommandOption("dateformat", Description = "Format used when writing dates.")]
+    public string DateFormat { get; init; } = "dd-MMM-yy hh:mm tt";
+
+    private ChannelExporter? _channelExporter;
+    protected ChannelExporter Exporter => _channelExporter ??= new ChannelExporter(Discord);
+
+    protected async ValueTask ExecuteAsync(IConsole console, IReadOnlyList<Channel> channels)
+    {
+        var cancellationToken = console.RegisterCancellationHandler();
+
+        if (ShouldReuseMedia && !ShouldDownloadMedia)
+        {
+            throw new CommandException("Option --reuse-media cannot be used without --media.");
+        }
+
+        var errors = new ConcurrentDictionary<Channel, string>();
+
+        // Export
+        await console.Output.WriteLineAsync($"Exporting {channels.Count} channel(s)...");
+        await console.CreateProgressTicker().StartAsync(async progressContext =>
+        {
+            await Parallel.ForEachAsync(
+                channels,
+                new ParallelOptions
+                {
+                    MaxDegreeOfParallelism = Math.Max(1, ParallelLimit),
+                    CancellationToken = cancellationToken
+                },
+                async (channel, innerCancellationToken) =>
+                {
+                    try
+                    {
+                        await progressContext.StartTaskAsync($"{channel.Category.Name} / {channel.Name}",
+                            async progress =>
+                            {
+                                var guild = await Discord.GetGuildAsync(channel.GuildId, innerCancellationToken);
+
+                                var request = new ExportRequest(
+                                    guild,
+                                    channel,
+                                    OutputPath,
+                                    ExportFormat,
+                                    After,
+                                    Before,
+                                    PartitionLimit,
+                                    MessageFilter,
+                                    ShouldDownloadMedia,
+                                    ShouldReuseMedia,
+                                    DateFormat
+                                );
+
+                                await Exporter.ExportChannelAsync(
+                                    request,
+                                    progress.ToPercentageBased(),
+                                    innerCancellationToken
+                                );
+                            }
+                        );
+                    }
+                    catch (DiscordChatExporterException ex) when (!ex.IsFatal)
+                    {
+                        errors[channel] = ex.Message;
+                    }
+                }
+            );
+        });
+
+        // Print result
+        using (console.WithForegroundColor(ConsoleColor.White))
+        {
+            await console.Output.WriteLineAsync(
+                $"Successfully exported {channels.Count - errors.Count} channel(s)."
+            );
+        }
+
+        // Print errors
+        if (errors.Any())
+        {
+            await console.Output.WriteLineAsync();
+
+            using (console.WithForegroundColor(ConsoleColor.Red))
+            {
+                await console.Output.WriteLineAsync(
+                    $"Failed to export {errors.Count} channel(s):"
+                );
+            }
+
+            foreach (var (channel, error) in errors)
+            {
+                await console.Output.WriteAsync($"{channel.Category.Name} / {channel.Name}: ");
+
+                using (console.WithForegroundColor(ConsoleColor.Red))
+                    await console.Output.WriteLineAsync(error);
+            }
+
+            await console.Output.WriteLineAsync();
+        }
+
+        // Fail the command only if ALL channels failed to export.
+        // Having some of the channels fail to export is expected.
+        if (errors.Count >= channels.Count)
+        {
+            throw new CommandException("Export failed.");
+        }
+    }
+
+    protected async ValueTask ExecuteAsync(IConsole console, IReadOnlyList<Snowflake> channelIds)
+    {
+        var cancellationToken = console.RegisterCancellationHandler();
+        var channels = new List<Channel>();
+
+        foreach (var channelId in channelIds)
+        {
+            var channel = await Discord.GetChannelAsync(channelId, cancellationToken);
+            channels.Add(channel);
+        }
+
+        await ExecuteAsync(console, channels);
+    }
+
+    public override ValueTask ExecuteAsync(IConsole console)
+    {
+        // War in Ukraine message
+        console.Output.WriteLine("========================================================================");
+        console.Output.WriteLine("||   Ukraine is at war! Support my country in its fight for freedom   ||");
+        console.Output.WriteLine("||   Learn more: https://tyrrrz.me                                    ||");
+        console.Output.WriteLine("========================================================================");
+        console.Output.WriteLine("");
+
+        return default;
+    }
+}

DiscordChatExporter.Cli/Commands/Base/TokenCommandBase.cs

@@ -0,0 +1,23 @@
+using System;
+using System.Threading.Tasks;
+using CliFx;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Core.Discord;
+
+namespace DiscordChatExporter.Cli.Commands.Base;
+
+public abstract class TokenCommandBase : ICommand
+{
+    [CommandOption("token", 't', IsRequired = true, EnvironmentVariable = "DISCORD_TOKEN", Description = "Authentication token.")]
+    public string Token { get; init; } = "";
+
+    [CommandOption("bot", 'b', EnvironmentVariable = "DISCORD_TOKEN_BOT", Description = "This option doesn't do anything. Kept for backwards compatibility.")]
+    [Obsolete("This option doesn't do anything. Kept for backwards compatibility.")]
+    public bool IsBotToken { get; init; }
+
+    private DiscordClient? _discordClient;
+    protected DiscordClient Discord => _discordClient ??= new DiscordClient(Token);
+
+    public abstract ValueTask ExecuteAsync(IConsole console);
+}

DiscordChatExporter.Cli/Commands/ExportAllCommand.cs

@@ -0,0 +1,42 @@
+using System.Collections.Generic;
+using System.Threading.Tasks;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands.Base;
+using DiscordChatExporter.Core.Discord.Data;
+
+namespace DiscordChatExporter.Cli.Commands;
+
+[Command("exportall", Description = "Export all accessible channels.")]
+public class ExportAllCommand : ExportCommandBase
+{
+    [CommandOption("include-dm", Description = "Include direct message channels.")]
+    public bool IncludeDirectMessages { get; init; } = true;
+
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        await base.ExecuteAsync(console);
+
+        var cancellationToken = console.RegisterCancellationHandler();
+        var channels = new List<Channel>();
+
+        await console.Output.WriteLineAsync("Fetching channels...");
+        await foreach (var guild in Discord.GetUserGuildsAsync(cancellationToken))
+        {
+            // Skip DMs if instructed to
+            if (!IncludeDirectMessages && guild.Id == Guild.DirectMessages.Id)
+                continue;
+
+            await foreach (var channel in Discord.GetGuildChannelsAsync(guild.Id, cancellationToken))
+            {
+                // Skip non-text channels
+                if (!channel.IsTextChannel)
+                    continue;
+
+                channels.Add(channel);
+            }
+        }
+
+        await base.ExecuteAsync(console, channels);
+    }
+}

DiscordChatExporter.Cli/Commands/ExportChannelsCommand.cs

@@ -0,0 +1,23 @@
+using System;
+using System.Collections.Generic;
+using System.Threading.Tasks;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands.Base;
+using DiscordChatExporter.Core.Discord;
+
+namespace DiscordChatExporter.Cli.Commands;
+
+[Command("export", Description = "Export one or multiple channels.")]
+public class ExportChannelsCommand : ExportCommandBase
+{
+    // TODO: change this to plural (breaking change)
+    [CommandOption("channel", 'c', IsRequired = true, Description = "Channel ID(s).")]
+    public IReadOnlyList<Snowflake> ChannelIds { get; init; } = Array.Empty<Snowflake>();
+
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        await base.ExecuteAsync(console);
+        await base.ExecuteAsync(console, ChannelIds);
+    }
+}

DiscordChatExporter.Cli/Commands/ExportDirectMessagesCommand.cs

@@ -0,0 +1,26 @@
+using System.Linq;
+using System.Threading.Tasks;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands.Base;
+using DiscordChatExporter.Core.Discord.Data;
+using DiscordChatExporter.Core.Utils.Extensions;
+
+namespace DiscordChatExporter.Cli.Commands;
+
+[Command("exportdm", Description = "Export all direct message channels.")]
+public class ExportDirectMessagesCommand : ExportCommandBase
+{
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        await base.ExecuteAsync(console);
+
+        var cancellationToken = console.RegisterCancellationHandler();
+
+        await console.Output.WriteLineAsync("Fetching channels...");
+        var channels = await Discord.GetGuildChannelsAsync(Guild.DirectMessages.Id, cancellationToken);
+        var textChannels = channels.Where(c => c.IsTextChannel).ToArray();
+
+        await base.ExecuteAsync(console, textChannels);
+    }
+}

DiscordChatExporter.Cli/Commands/ExportGuildCommand.cs

@@ -0,0 +1,29 @@
+using System.Linq;
+using System.Threading.Tasks;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands.Base;
+using DiscordChatExporter.Core.Discord;
+using DiscordChatExporter.Core.Utils.Extensions;
+
+namespace DiscordChatExporter.Cli.Commands;
+
+[Command("exportguild", Description = "Export all channels within specified guild.")]
+public class ExportGuildCommand : ExportCommandBase
+{
+    [CommandOption("guild", 'g', IsRequired = true, Description = "Guild ID.")]
+    public Snowflake GuildId { get; init; }
+
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        await base.ExecuteAsync(console);
+
+        var cancellationToken = console.RegisterCancellationHandler();
+
+        await console.Output.WriteLineAsync("Fetching channels...");
+        var channels = await Discord.GetGuildChannelsAsync(GuildId, cancellationToken);
+        var textChannels = channels.Where(c => c.IsTextChannel).ToArray();
+
+        await base.ExecuteAsync(console, textChannels);
+    }
+}

DiscordChatExporter.Cli/Commands/GetChannelsCommand.cs

@@ -0,0 +1,44 @@
+using System;
+using System.Linq;
+using System.Threading.Tasks;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands.Base;
+using DiscordChatExporter.Core.Discord;
+using DiscordChatExporter.Core.Utils.Extensions;
+
+namespace DiscordChatExporter.Cli.Commands;
+
+[Command("channels", Description = "Get the list of channels in a guild.")]
+public class GetChannelsCommand : TokenCommandBase
+{
+    [CommandOption("guild", 'g', IsRequired = true, Description = "Guild ID.")]
+    public Snowflake GuildId { get; init; }
+
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        var cancellationToken = console.RegisterCancellationHandler();
+
+        var channels = await Discord.GetGuildChannelsAsync(GuildId, cancellationToken);
+
+        var textChannels = channels
+            .Where(c => c.IsTextChannel)
+            .OrderBy(c => c.Category.Position)
+            .ThenBy(c => c.Name)
+            .ToArray();
+
+        foreach (var channel in textChannels)
+        {
+            // Channel ID
+            await console.Output.WriteAsync(channel.Id.ToString());
+
+            // Separator
+            using (console.WithForegroundColor(ConsoleColor.DarkGray))
+                await console.Output.WriteAsync(" | ");
+
+            // Channel category / name
+            using (console.WithForegroundColor(ConsoleColor.White))
+                await console.Output.WriteLineAsync($"{channel.Category.Name} / {channel.Name}");
+        }
+    }
+}

DiscordChatExporter.Cli/Commands/GetDirectMessageChannelsCommand.cs

@@ -0,0 +1,41 @@
+using System;
+using System.Linq;
+using System.Threading.Tasks;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands.Base;
+using DiscordChatExporter.Core.Discord.Data;
+using DiscordChatExporter.Core.Utils.Extensions;
+
+namespace DiscordChatExporter.Cli.Commands;
+
+[Command("dm", Description = "Get the list of direct message channels.")]
+public class GetDirectMessageChannelsCommand : TokenCommandBase
+{
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        var cancellationToken = console.RegisterCancellationHandler();
+
+        var channels = await Discord.GetGuildChannelsAsync(Guild.DirectMessages.Id, cancellationToken);
+
+        var textChannels = channels
+            .Where(c => c.IsTextChannel)
+            .OrderBy(c => c.Category.Position)
+            .ThenBy(c => c.Name)
+            .ToArray();
+
+        foreach (var channel in textChannels)
+        {
+            // Channel ID
+            await console.Output.WriteAsync(channel.Id.ToString());
+
+            // Separator
+            using (console.WithForegroundColor(ConsoleColor.DarkGray))
+                await console.Output.WriteAsync(" | ");
+
+            // Channel category / name
+            using (console.WithForegroundColor(ConsoleColor.White))
+                await console.Output.WriteLineAsync($"{channel.Category.Name} / {channel.Name}");
+        }
+    }
+}

DiscordChatExporter.Cli/Commands/GetGuildsCommand.cs

@@ -0,0 +1,34 @@
+using System;
+using System.Linq;
+using System.Threading.Tasks;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using DiscordChatExporter.Cli.Commands.Base;
+using DiscordChatExporter.Core.Utils.Extensions;
+
+namespace DiscordChatExporter.Cli.Commands;
+
+[Command("guilds", Description = "Get the list of accessible guilds.")]
+public class GetGuildsCommand : TokenCommandBase
+{
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        var cancellationToken = console.RegisterCancellationHandler();
+
+        var guilds = await Discord.GetUserGuildsAsync(cancellationToken);
+
+        foreach (var guild in guilds.OrderBy(g => g.Name))
+        {
+            // Guild ID
+            await console.Output.WriteAsync(guild.Id.ToString());
+
+            // Separator
+            using (console.WithForegroundColor(ConsoleColor.DarkGray))
+                await console.Output.WriteAsync(" | ");
+
+            // Guild name
+            using (console.WithForegroundColor(ConsoleColor.White))
+                await console.Output.WriteLineAsync(guild.Name);
+        }
+    }
+}

DiscordChatExporter.Cli/Commands/GuideCommand.cs

@@ -0,0 +1,70 @@
+using System;
+using System.Threading.Tasks;
+using CliFx;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+
+namespace DiscordChatExporter.Cli.Commands;
+
+[Command("guide", Description = "Explains how to obtain token, guild or channel ID.")]
+public class GuideCommand : ICommand
+{
+    public ValueTask ExecuteAsync(IConsole console)
+    {
+        // User token
+        using (console.WithForegroundColor(ConsoleColor.White))
+            console.Output.WriteLine("To get user token:");
+
+        console.Output.WriteLine(" 1. Open Discord in your web browser and login");
+        console.Output.WriteLine(" 2. Press Ctrl+Shift+I to show developer tools");
+        console.Output.WriteLine(" 3. Press Ctrl+Shift+M to toggle device toolbar");
+        console.Output.WriteLine(" 4. Navigate to the Application tab");
+        console.Output.WriteLine(" 5. On the left, expand Local Storage and select https://discord.com");
+        console.Output.WriteLine(" 6. Type \"token\" into the Filter box");
+        console.Output.WriteLine(" 7. If the token key does not appear, press Ctrl+R to reload");
+        console.Output.WriteLine(" 8. Copy the value of the token key");
+        console.Output.WriteLine(" *  Automating user accounts is technically against TOS, use at your own risk.");
+        console.Output.WriteLine();
+
+        // Bot token
+        using (console.WithForegroundColor(ConsoleColor.White))
+            console.Output.WriteLine("To get bot token:");
+
+        console.Output.WriteLine(" 1. Go to Discord developer portal");
+        console.Output.WriteLine(" 2. Open your application's settings");
+        console.Output.WriteLine(" 3. Navigate to the Bot section on the left");
+        console.Output.WriteLine(" 4. Under Token click Copy");
+        console.Output.WriteLine();
+
+        // Guild or channel ID
+        using (console.WithForegroundColor(ConsoleColor.White))
+            console.Output.WriteLine("To get guild ID or guild channel ID:");
+
+        console.Output.WriteLine(" 1. Open Discord");
+        console.Output.WriteLine(" 2. Open Settings");
+        console.Output.WriteLine(" 3. Go to Appearance section");
+        console.Output.WriteLine(" 4. Enable Developer Mode");
+        console.Output.WriteLine(" 5. Right click on the desired guild or channel and click Copy ID");
+        console.Output.WriteLine();
+
+        // Direct message channel ID
+        using (console.WithForegroundColor(ConsoleColor.White))
+            console.Output.WriteLine("To get direct message channel ID:");
+
+        console.Output.WriteLine(" 1. Open Discord");
+        console.Output.WriteLine(" 2. Open the desired direct message channel");
+        console.Output.WriteLine(" 3. Press Ctrl+Shift+I to show developer tools");
+        console.Output.WriteLine(" 4. Navigate to the Console tab");
+        console.Output.WriteLine(" 5. Type \"window.location.href\" and press Enter");
+        console.Output.WriteLine(" 6. Copy the first long sequence of numbers inside the URL");
+        console.Output.WriteLine();
+
+        // Wiki link
+        using (console.WithForegroundColor(ConsoleColor.White))
+            console.Output.WriteLine("If you have questions or issues, please refer to the wiki:");
+        using (console.WithForegroundColor(ConsoleColor.DarkCyan))
+            console.Output.WriteLine("https://github.com/Tyrrrz/DiscordChatExporter/wiki");
+
+        return default;
+    }
+}

DiscordChatExporter.Cli/Container.cs

@@ -1,24 +0,0 @@
-using DiscordChatExporter.Core.Services;
-using StyletIoC;
-
-namespace DiscordChatExporter.Cli
-{
-    public static class Container
-    {
-        public static IContainer Instance { get; }
-
-        static Container()
-        {
-            var builder = new StyletIoCBuilder();
-
-            // Autobind the .Services assembly
-            builder.Autobind(typeof(DataService).Assembly);
-
-            // Bind settings as singleton
-            builder.Bind<SettingsService>().ToSelf().InSingletonScope();
-
-            // Set instance
-            Instance = builder.BuildContainer();
-        }
-    }
-}

DiscordChatExporter.Cli/DiscordChatExporter.Cli.csproj

@@ -2,24 +2,17 @@
 
   <PropertyGroup>
     <OutputType>Exe</OutputType>
-    <TargetFrameworks>net46;netcoreapp2.1</TargetFrameworks>
-    <Version>2.14</Version>
-    <Company>Tyrrrz</Company>
-    <Copyright>Copyright (c) Alexey Golub</Copyright>
     <ApplicationIcon>..\favicon.ico</ApplicationIcon>
-    <CopyLocalLockFileAssemblies>true</CopyLocalLockFileAssemblies>
-    <LangVersion>latest</LangVersion>
   </PropertyGroup>
 
   <ItemGroup>
-    <PackageReference Include="CommandLineParser" Version="2.3.0" />
-    <PackageReference Include="Stylet" Version="1.2.0" />
-    <PackageReference Include="Tyrrrz.Extensions" Version="1.6.2" />
+    <PackageReference Include="CliFx" Version="2.2.5" />
+    <PackageReference Include="Spectre.Console" Version="0.44.0" />
+    <PackageReference Include="Gress" Version="2.0.1" />
   </ItemGroup>
 
   <ItemGroup>
-    <ProjectReference Include="..\DiscordChatExporter.Core.Models\DiscordChatExporter.Core.Models.csproj" />
-    <ProjectReference Include="..\DiscordChatExporter.Core.Services\DiscordChatExporter.Core.Services.csproj" />
+    <ProjectReference Include="..\DiscordChatExporter.Core\DiscordChatExporter.Core.csproj" />
   </ItemGroup>
 
 </Project>

DiscordChatExporter.Cli/Internal/InlineProgress.cs

@@ -1,47 +0,0 @@
-using System;
-
-namespace DiscordChatExporter.Cli.Internal
-{
-    internal class InlineProgress : IProgress<double>, IDisposable
-    {
-        private readonly int _posX;
-        private readonly int _posY;
-
-        private bool _isCompleted;
-
-        public InlineProgress()
-        {
-            // If output is not redirected - save initial cursor position
-            if (!Console.IsOutputRedirected)
-            {
-                _posX = Console.CursorLeft;
-                _posY = Console.CursorTop;
-            }
-        }
-
-        public void Report(double progress)
-        {
-            // If output is not redirected - reset cursor position and write progress
-            if (!Console.IsOutputRedirected)
-            {
-                Console.SetCursorPosition(_posX, _posY);
-                Console.WriteLine($"{progress:P1}");
-            }
-        }
-
-        public void ReportCompletion() => _isCompleted = true;
-
-        public void Dispose()
-        {
-            // If output is not redirected - reset cursor position
-            if (!Console.IsOutputRedirected)
-                Console.SetCursorPosition(_posX, _posY);
-
-            // Inform about completion
-            if (_isCompleted)
-                Console.WriteLine("Completed ✓");
-            else
-                Console.WriteLine("Failed X");
-        }
-    }
-}

DiscordChatExporter.Cli/Program.cs

@@ -1,80 +1,6 @@
-using System;
-using System.Linq;
-using CommandLine;
-using DiscordChatExporter.Cli.Verbs;
-using DiscordChatExporter.Cli.Verbs.Options;
+using CliFx;
 
-namespace DiscordChatExporter.Cli
-{
-    public static class Program
-    {
-        private static void PrintTokenHelp()
-        {
-            Console.WriteLine("# To get user token:");
-            Console.WriteLine(" 1. Open Discord");
-            Console.WriteLine(" 2. Press Ctrl+Shift+I to show developer tools");
-            Console.WriteLine(" 3. Navigate to the Application tab");
-            Console.WriteLine(" 4. Select \"Local Storage\" > \"https://discordapp.com\" on the left");
-            Console.WriteLine(" 5. Press Ctrl+R to reload");
-            Console.WriteLine(" 6. Find \"token\" at the bottom and copy the value");
-            Console.WriteLine();
-            Console.WriteLine("# To get bot token:");
-            Console.WriteLine(" 1. Go to Discord developer portal");
-            Console.WriteLine(" 2. Open your application's settings");
-            Console.WriteLine(" 3. Navigate to the Bot section on the left");
-            Console.WriteLine(" 4. Under Token click Copy");
-            Console.WriteLine();
-            Console.WriteLine("# To get guild ID or guild channel ID:");
-            Console.WriteLine(" 1. Open Discord");
-            Console.WriteLine(" 2. Open Settings");
-            Console.WriteLine(" 3. Go to Appearance section");
-            Console.WriteLine(" 4. Enable Developer Mode");
-            Console.WriteLine(" 5. Right click on the desired guild or channel and click Copy ID");
-            Console.WriteLine();
-            Console.WriteLine("# To get direct message channel ID:");
-            Console.WriteLine(" 1. Open Discord");
-            Console.WriteLine(" 2. Open the desired direct message channel");
-            Console.WriteLine(" 3. Press Ctrl+Shift+I to show developer tools");
-            Console.WriteLine(" 4. Navigate to the Console tab");
-            Console.WriteLine(" 5. Type \"window.location.href\" and press Enter");
-            Console.WriteLine(" 6. Copy the first long sequence of numbers inside the URL");
-        }
-
-        public static void Main(string[] args)
-        {
-            // Get all verb types
-            var verbTypes = new[]
-            {
-                typeof(ExportChannelOptions),
-                typeof(ExportDirectMessagesOptions),
-                typeof(ExportGuildOptions),
-                typeof(GetChannelsOptions),
-                typeof(GetDirectMessageChannelsOptions),
-                typeof(GetGuildsOptions)
-            };
-
-            // Parse command line arguments
-            var parsedArgs = Parser.Default.ParseArguments(args, verbTypes);
-
-            // Execute commands
-            parsedArgs.WithParsed<ExportChannelOptions>(o => new ExportChannelVerb(o).Execute());
-            parsedArgs.WithParsed<ExportDirectMessagesOptions>(o => new ExportDirectMessagesVerb(o).Execute());
-            parsedArgs.WithParsed<ExportGuildOptions>(o => new ExportGuildVerb(o).Execute());
-            parsedArgs.WithParsed<GetChannelsOptions>(o => new GetChannelsVerb(o).Execute());
-            parsedArgs.WithParsed<GetDirectMessageChannelsOptions>(o => new GetDirectMessageChannelsVerb(o).Execute());
-            parsedArgs.WithParsed<GetGuildsOptions>(o => new GetGuildsVerb(o).Execute());
-
-            // Show token help if help requested or no verb specified
-            parsedArgs.WithNotParsed(errs =>
-            {
-                var err = errs.First();
-
-                if (err.Tag == ErrorType.NoVerbSelectedError)
-                    PrintTokenHelp();
-
-                if (err.Tag == ErrorType.HelpVerbRequestedError && args.Length == 1)
-                    PrintTokenHelp();
-            });
-        }
-    }
-}
+return await new CliApplicationBuilder()
+    .AddCommandsFromThisAssembly()
+    .Build()
+    .RunAsync(args);

DiscordChatExporter.Cli/Utils/Extensions/ConsoleExtensions.cs

@@ -0,0 +1,50 @@
+using System;
+using System.Threading.Tasks;
+using CliFx.Infrastructure;
+using Spectre.Console;
+
+namespace DiscordChatExporter.Cli.Utils.Extensions;
+
+internal static class ConsoleExtensions
+{
+    public static IAnsiConsole CreateAnsiConsole(this IConsole console) =>
+        AnsiConsole.Create(new AnsiConsoleSettings
+        {
+            Ansi = AnsiSupport.Detect,
+            ColorSystem = ColorSystemSupport.Detect,
+            Out = new AnsiConsoleOutput(console.Output)
+        });
+
+    public static Progress CreateProgressTicker(this IConsole console) => console
+        .CreateAnsiConsole()
+        .Progress()
+        .AutoClear(false)
+        .AutoRefresh(true)
+        .HideCompleted(false)
+        .Columns(
+            new TaskDescriptionColumn {Alignment = Justify.Left},
+            new ProgressBarColumn(),
+            new PercentageColumn()
+        );
+
+    public static async ValueTask StartTaskAsync(
+        this ProgressContext progressContext,
+        string description,
+        Func<ProgressTask, ValueTask> performOperationAsync)
+    {
+        var progressTask = progressContext.AddTask(
+            // Don't recognize random square brackets as style tags
+            Markup.Escape(description),
+            new ProgressTaskSettings {MaxValue = 1}
+        );
+
+        try
+        {
+            await performOperationAsync(progressTask);
+        }
+        finally
+        {
+            progressTask.StopTask();
+        }
+    }
+}

DiscordChatExporter.Cli/Verbs/ExportChannelVerb.cs

@@ -1,58 +0,0 @@
-using System;
-using System.IO;
-using System.Threading.Tasks;
-using DiscordChatExporter.Cli.Internal;
-using DiscordChatExporter.Cli.Verbs.Options;
-using DiscordChatExporter.Core.Services;
-using DiscordChatExporter.Core.Services.Helpers;
-using Tyrrrz.Extensions;
-
-namespace DiscordChatExporter.Cli.Verbs
-{
-    public class ExportChannelVerb : Verb<ExportChannelOptions>
-    {
-        public ExportChannelVerb(ExportChannelOptions options)
-            : base(options)
-        {
-        }
-
-        public override async Task ExecuteAsync()
-        {
-            // Get services
-            var settingsService = Container.Instance.Get<SettingsService>();
-            var dataService = Container.Instance.Get<DataService>();
-            var exportService = Container.Instance.Get<ExportService>();
-
-            // Configure settings
-            if (!Options.DateFormat.IsNullOrWhiteSpace())
-                settingsService.DateFormat = Options.DateFormat;
-
-            // Track progress
-            Console.Write($"Exporting channel [{Options.ChannelId}]... ");
-            using (var progress = new InlineProgress())
-            {
-                // Get chat log
-                var chatLog = await dataService.GetChatLogAsync(Options.GetToken(), Options.ChannelId,
-                    Options.After, Options.Before, progress);
-
-                // Generate file path if not set or is a directory
-                var filePath = Options.OutputPath;
-                if (filePath.IsNullOrWhiteSpace() || ExportHelper.IsDirectoryPath(filePath))
-                {
-                    // Generate default file name
-                    var fileName = ExportHelper.GetDefaultExportFileName(Options.ExportFormat, chatLog.Guild,
-                        chatLog.Channel, Options.After, Options.Before);
-
-                    // Combine paths
-                    filePath = Path.Combine(filePath ?? "", fileName);
-                }
-
-                // Export
-                await exportService.ExportChatLogAsync(chatLog, filePath, Options.ExportFormat, Options.PartitionLimit);
-
-                // Report successful completion
-                progress.ReportCompletion();
-            }
-        }
-    }
-}

DiscordChatExporter.Cli/Verbs/ExportDirectMessagesVerb.cs

@@ -1,78 +0,0 @@
-using System;
-using System.IO;
-using System.Linq;
-using System.Net;
-using System.Threading.Tasks;
-using DiscordChatExporter.Cli.Internal;
-using DiscordChatExporter.Cli.Verbs.Options;
-using DiscordChatExporter.Core.Services;
-using DiscordChatExporter.Core.Services.Exceptions;
-using DiscordChatExporter.Core.Services.Helpers;
-using Tyrrrz.Extensions;
-
-namespace DiscordChatExporter.Cli.Verbs
-{
-    public class ExportDirectMessagesVerb : Verb<ExportDirectMessagesOptions>
-    {
-        public ExportDirectMessagesVerb(ExportDirectMessagesOptions options)
-            : base(options)
-        {
-        }
-
-        public override async Task ExecuteAsync()
-        {
-            // Get services
-            var settingsService = Container.Instance.Get<SettingsService>();
-            var dataService = Container.Instance.Get<DataService>();
-            var exportService = Container.Instance.Get<ExportService>();
-
-            // Configure settings
-            if (!Options.DateFormat.IsNullOrWhiteSpace())
-                settingsService.DateFormat = Options.DateFormat;
-
-            // Get channels
-            var channels = await dataService.GetDirectMessageChannelsAsync(Options.GetToken());
-
-            // Order channels
-            channels = channels.OrderBy(c => c.Name).ToArray();
-
-            // Loop through channels
-            foreach (var channel in channels)
-            {
-                try
-                {
-                    // Track progress
-                    Console.Write($"Exporting channel [{channel.Name}]... ");
-                    using (var progress = new InlineProgress())
-                    {
-                        // Get chat log
-                        var chatLog = await dataService.GetChatLogAsync(Options.GetToken(), channel,
-                            Options.After, Options.Before, progress);
-
-                        // Generate default file name
-                        var fileName = ExportHelper.GetDefaultExportFileName(Options.ExportFormat, chatLog.Guild,
-                            chatLog.Channel, Options.After, Options.Before);
-
-                        // Generate file path
-                        var filePath = Path.Combine(Options.OutputPath ?? "", fileName);
-
-                        // Export
-                        await exportService.ExportChatLogAsync(chatLog, filePath, Options.ExportFormat,
-                            Options.PartitionLimit);
-
-                        // Report successful completion
-                        progress.ReportCompletion();
-                    }
-                }
-                catch (HttpErrorStatusCodeException ex) when (ex.StatusCode == HttpStatusCode.Forbidden)
-                {
-                    Console.Error.WriteLine("You don't have access to this channel");
-                }
-                catch (HttpErrorStatusCodeException ex) when (ex.StatusCode == HttpStatusCode.NotFound)
-                {
-                    Console.Error.WriteLine("This channel doesn't exist");
-                }
-            }
-        }
-    }
-}

DiscordChatExporter.Cli/Verbs/ExportGuildVerb.cs

@@ -1,79 +0,0 @@
-using System;
-using System.IO;
-using System.Linq;
-using System.Net;
-using System.Threading.Tasks;
-using DiscordChatExporter.Cli.Internal;
-using DiscordChatExporter.Cli.Verbs.Options;
-using DiscordChatExporter.Core.Models;
-using DiscordChatExporter.Core.Services;
-using DiscordChatExporter.Core.Services.Exceptions;
-using DiscordChatExporter.Core.Services.Helpers;
-using Tyrrrz.Extensions;
-
-namespace DiscordChatExporter.Cli.Verbs
-{
-    public class ExportGuildVerb : Verb<ExportGuildOptions>
-    {
-        public ExportGuildVerb(ExportGuildOptions options)
-            : base(options)
-        {
-        }
-
-        public override async Task ExecuteAsync()
-        {
-            // Get services
-            var settingsService = Container.Instance.Get<SettingsService>();
-            var dataService = Container.Instance.Get<DataService>();
-            var exportService = Container.Instance.Get<ExportService>();
-
-            // Configure settings
-            if (!Options.DateFormat.IsNullOrWhiteSpace())
-                settingsService.DateFormat = Options.DateFormat;
-
-            // Get channels
-            var channels = await dataService.GetGuildChannelsAsync(Options.GetToken(), Options.GuildId);
-
-            // Filter and order channels
-            channels = channels.Where(c => c.Type == ChannelType.GuildTextChat).OrderBy(c => c.Name).ToArray();
-
-            // Loop through channels
-            foreach (var channel in channels)
-            {
-                try
-                {
-                    // Track progress
-                    Console.Write($"Exporting channel [{channel.Name}]... ");
-                    using (var progress = new InlineProgress())
-                    {
-                        // Get chat log
-                        var chatLog = await dataService.GetChatLogAsync(Options.GetToken(), channel,
-                            Options.After, Options.Before, progress);
-
-                        // Generate default file name
-                        var fileName = ExportHelper.GetDefaultExportFileName(Options.ExportFormat, chatLog.Guild,
-                            chatLog.Channel, Options.After, Options.Before);
-
-                        // Generate file path
-                        var filePath = Path.Combine(Options.OutputPath ?? "", fileName);
-
-                        // Export
-                        await exportService.ExportChatLogAsync(chatLog, filePath, Options.ExportFormat,
-                            Options.PartitionLimit);
-
-                        // Report successful completion
-                        progress.ReportCompletion();
-                    }
-                }
-                catch (HttpErrorStatusCodeException ex) when (ex.StatusCode == HttpStatusCode.Forbidden)
-                {
-                    Console.Error.WriteLine("You don't have access to this channel");
-                }
-                catch (HttpErrorStatusCodeException ex) when (ex.StatusCode == HttpStatusCode.NotFound)
-                {
-                    Console.Error.WriteLine("This channel doesn't exist");
-                }
-            }
-        }
-    }
-}

DiscordChatExporter.Cli/Verbs/GetChannelsVerb.cs

@@ -1,33 +0,0 @@
-using System;
-using System.Linq;
-using System.Threading.Tasks;
-using DiscordChatExporter.Cli.Verbs.Options;
-using DiscordChatExporter.Core.Models;
-using DiscordChatExporter.Core.Services;
-
-namespace DiscordChatExporter.Cli.Verbs
-{
-    public class GetChannelsVerb : Verb<GetChannelsOptions>
-    {
-        public GetChannelsVerb(GetChannelsOptions options)
-            : base(options)
-        {
-        }
-
-        public override async Task ExecuteAsync()
-        {
-            // Get data service
-            var dataService = Container.Instance.Get<DataService>();
-
-            // Get channels
-            var channels = await dataService.GetGuildChannelsAsync(Options.GetToken(), Options.GuildId);
-
-            // Filter and order channels
-            channels = channels.Where(c => c.Type == ChannelType.GuildTextChat).OrderBy(c => c.Name).ToArray();
-
-            // Print result
-            foreach (var channel in channels)
-                Console.WriteLine($"{channel.Id} | {channel.Name}");
-        }
-    }
-}

DiscordChatExporter.Cli/Verbs/GetDirectMessageChannelsVerb.cs

@@ -1,32 +0,0 @@
-using System;
-using System.Linq;
-using System.Threading.Tasks;
-using DiscordChatExporter.Cli.Verbs.Options;
-using DiscordChatExporter.Core.Services;
-
-namespace DiscordChatExporter.Cli.Verbs
-{
-    public class GetDirectMessageChannelsVerb : Verb<GetDirectMessageChannelsOptions>
-    {
-        public GetDirectMessageChannelsVerb(GetDirectMessageChannelsOptions options)
-            : base(options)
-        {
-        }
-
-        public override async Task ExecuteAsync()
-        {
-            // Get data service
-            var dataService = Container.Instance.Get<DataService>();
-
-            // Get channels
-            var channels = await dataService.GetDirectMessageChannelsAsync(Options.GetToken());
-
-            // Order channels
-            channels = channels.OrderBy(c => c.Name).ToArray();
-
-            // Print result
-            foreach (var channel in channels)
-                Console.WriteLine($"{channel.Id} | {channel.Name}");
-        }
-    }
-}

DiscordChatExporter.Cli/Verbs/GetGuildsVerb.cs

@@ -1,32 +0,0 @@
-using System;
-using System.Linq;
-using System.Threading.Tasks;
-using DiscordChatExporter.Cli.Verbs.Options;
-using DiscordChatExporter.Core.Services;
-
-namespace DiscordChatExporter.Cli.Verbs
-{
-    public class GetGuildsVerb : Verb<GetGuildsOptions>
-    {
-        public GetGuildsVerb(GetGuildsOptions options)
-            : base(options)
-        {
-        }
-
-        public override async Task ExecuteAsync()
-        {
-            // Get data service
-            var dataService = Container.Instance.Get<DataService>();
-
-            // Get guilds
-            var guilds = await dataService.GetUserGuildsAsync(Options.GetToken());
-
-            // Order guilds
-            guilds = guilds.OrderBy(g => g.Name).ToArray();
-
-            // Print result
-            foreach (var guild in guilds)
-                Console.WriteLine($"{guild.Id} | {guild.Name}");
-        }
-    }
-}

DiscordChatExporter.Cli/Verbs/Options/ExportChannelOptions.cs

@@ -1,11 +0,0 @@
-using CommandLine;
-
-namespace DiscordChatExporter.Cli.Verbs.Options
-{
-    [Verb("export", HelpText = "Export channel.")]
-    public class ExportChannelOptions : ExportOptions
-    {
-        [Option('c', "channel", Required = true, HelpText = "Channel ID.")]
-        public string ChannelId { get; set; }
-    }
-}

DiscordChatExporter.Cli/Verbs/Options/ExportDirectMessagesOptions.cs

@@ -1,9 +0,0 @@
-using CommandLine;
-
-namespace DiscordChatExporter.Cli.Verbs.Options
-{
-    [Verb("exportdm", HelpText = "Export all direct message channels.")]
-    public class ExportDirectMessagesOptions : ExportOptions
-    {
-    }
-}

DiscordChatExporter.Cli/Verbs/Options/ExportGuildOptions.cs

@@ -1,11 +0,0 @@
-using CommandLine;
-
-namespace DiscordChatExporter.Cli.Verbs.Options
-{
-    [Verb("exportguild", HelpText = "Export all channels within a given guild.")]
-    public class ExportGuildOptions : ExportOptions
-    {
-        [Option('g', "guild", Required = true, HelpText = "Guild ID.")]
-        public string GuildId { get; set; }
-    }
-}

DiscordChatExporter.Cli/Verbs/Options/ExportOptions.cs

@@ -1,29 +0,0 @@
-using System;
-using CommandLine;
-using DiscordChatExporter.Core.Models;
-
-namespace DiscordChatExporter.Cli.Verbs.Options
-{
-    public abstract class ExportOptions : TokenOptions
-    {
-        [Option('f', "format", Default = ExportFormat.HtmlDark, HelpText = "Output file format.")]
-        public ExportFormat ExportFormat { get; set; }
-
-        [Option('o', "output", Default = null, HelpText = "Output file or directory path.")]
-        public string OutputPath { get; set; }
-
-        // HACK: CommandLineParser doesn't support DateTimeOffset
-        [Option("after", Default = null, HelpText = "Limit to messages sent after this date.")]
-        public DateTime? After { get; set; }
-
-        // HACK: CommandLineParser doesn't support DateTimeOffset
-        [Option("before", Default = null, HelpText = "Limit to messages sent before this date.")]
-        public DateTime? Before { get; set; }
-
-        [Option('p', "partition", Default = null, HelpText = "Split output into partitions limited to this number of messages.")]
-        public int? PartitionLimit { get; set; }
-
-        [Option("dateformat", Default = null, HelpText = "Date format used in output.")]
-        public string DateFormat { get; set; }
-    }
-}

DiscordChatExporter.Cli/Verbs/Options/GetChannelsOptions.cs

@@ -1,11 +0,0 @@
-using CommandLine;
-
-namespace DiscordChatExporter.Cli.Verbs.Options
-{
-    [Verb("channels", HelpText = "Get the list of channels in the given guild.")]
-    public class GetChannelsOptions : TokenOptions
-    {
-        [Option('g', "guild", Required = true, HelpText = "Guild ID.")]
-        public string GuildId { get; set; }
-    }
-}

DiscordChatExporter.Cli/Verbs/Options/GetDirectMessageChannelsOptions.cs

@@ -1,9 +0,0 @@
-using CommandLine;
-
-namespace DiscordChatExporter.Cli.Verbs.Options
-{
-    [Verb("dm", HelpText = "Get the list of direct message channels.")]
-    public class GetDirectMessageChannelsOptions : TokenOptions
-    {
-    }
-}

DiscordChatExporter.Cli/Verbs/Options/GetGuildsOptions.cs

@@ -1,9 +0,0 @@
-using CommandLine;
-
-namespace DiscordChatExporter.Cli.Verbs.Options
-{
-    [Verb("guilds", HelpText = "Get the list of accessible guilds.")]
-    public class GetGuildsOptions : TokenOptions
-    {
-    }
-}

DiscordChatExporter.Cli/Verbs/Options/TokenOptions.cs

@@ -1,16 +0,0 @@
-using CommandLine;
-using DiscordChatExporter.Core.Models;
-
-namespace DiscordChatExporter.Cli.Verbs.Options
-{
-    public abstract class TokenOptions
-    {
-        [Option('t', "token", Required = true, HelpText = "Authorization token.")]
-        public string TokenValue { get; set; }
-
-        [Option('b', "bot", Default = false, HelpText = "Whether this authorization token belongs to a bot.")]
-        public bool IsBotToken { get; set; }
-
-        public AuthToken GetToken() => new AuthToken(IsBotToken ? AuthTokenType.Bot : AuthTokenType.User, TokenValue);
-    }
-}

DiscordChatExporter.Cli/Verbs/Verb.cs

@@ -1,18 +0,0 @@
-using System.Threading.Tasks;
-
-namespace DiscordChatExporter.Cli.Verbs
-{
-    public abstract class Verb<TOptions>
-    {
-        protected TOptions Options { get; }
-
-        protected Verb(TOptions options)
-        {
-            Options = options;
-        }
-
-        public abstract Task ExecuteAsync();
-
-        public virtual void Execute() => ExecuteAsync().GetAwaiter().GetResult();
-    }
-}

DiscordChatExporter.Core.Markdown/DiscordChatExporter.Core.Markdown.csproj

@@ -1,12 +0,0 @@
-<Project Sdk="Microsoft.NET.Sdk">
-
-  <PropertyGroup>
-    <TargetFrameworks>net46;netstandard2.0</TargetFrameworks>
-    <LangVersion>latest</LangVersion>
-  </PropertyGroup>
-
-  <ItemGroup>
-    <PackageReference Include="Tyrrrz.Extensions" Version="1.6.2" />
-  </ItemGroup>
-
-</Project>

DiscordChatExporter.Core.Markdown/Internal/AggregateMatcher.cs

@@ -1,46 +0,0 @@
-using System.Collections.Generic;
-
-namespace DiscordChatExporter.Core.Markdown.Internal
-{
-    internal class AggregateMatcher<T> : IMatcher<T>
-    {
-        private readonly IReadOnlyList<IMatcher<T>> _matchers;
-
-        public AggregateMatcher(IReadOnlyList<IMatcher<T>> matchers)
-        {
-            _matchers = matchers;
-        }
-
-        public AggregateMatcher(params IMatcher<T>[] matchers)
-            : this((IReadOnlyList<IMatcher<T>>)matchers)
-        {
-        }
-
-        public ParsedMatch<T> Match(string input, int startIndex, int length)
-        {
-            ParsedMatch<T> earliestMatch = null;
-
-            // Try to match the input with each matcher and get the match with the lowest start index
-            foreach (var matcher in _matchers)
-            {
-                // Try to match
-                var match = matcher.Match(input, startIndex, length);
-
-                // If there's no match - continue
-                if (match == null)
-                    continue;
-
-                // If this match is earlier than previous earliest - replace
-                if (earliestMatch == null || match.StartIndex < earliestMatch.StartIndex)
-                    earliestMatch = match;
-
-                // If the earliest match starts at the very beginning - break,
-                // because it's impossible to find a match earlier than that
-                if (earliestMatch.StartIndex == startIndex)
-                    break;
-            }
-
-            return earliestMatch;
-        }
-    }
-}

DiscordChatExporter.Core.Markdown/Internal/Extensions.cs

@@ -1,50 +0,0 @@
-using System;
-using System.Collections.Generic;
-
-namespace DiscordChatExporter.Core.Markdown.Internal
-{
-    internal static class Extensions
-    {
-        public static IEnumerable<ParsedMatch<T>> MatchAll<T>(this IMatcher<T> matcher, string input,
-            int startIndex, int length, Func<string, T> fallbackTransform)
-        {
-            // Get end index for simplicity
-            var endIndex = startIndex + length;
-
-            // Loop through segments divided by individual matches
-            var currentIndex = startIndex;
-            while (currentIndex < endIndex)
-            {
-                // Find a match within this segment
-                var match = matcher.Match(input, currentIndex, endIndex - currentIndex);
-
-                // If there's no match - break
-                if (match == null)
-                    break;
-
-                // If this match doesn't start immediately at current index - transform and yield fallback first
-                if (match.StartIndex > currentIndex)
-                {
-                    var fallback = input.Substring(currentIndex, match.StartIndex - currentIndex);
-                    yield return new ParsedMatch<T>(currentIndex, fallback.Length, fallbackTransform(fallback));
-                }
-
-                // Yield match
-                yield return match;
-
-                // Shift current index to the end of the match
-                currentIndex = match.StartIndex + match.Length;
-            }
-
-            // If EOL wasn't reached - transform and yield remaining part as fallback
-            if (currentIndex < endIndex)
-            {
-                var fallback = input.Substring(currentIndex);
-                yield return new ParsedMatch<T>(currentIndex, fallback.Length, fallbackTransform(fallback));
-            }
-        }
-
-        public static IEnumerable<ParsedMatch<T>> MatchAll<T>(this IMatcher<T> matcher, string input,
-            Func<string, T> fallbackTransform) => matcher.MatchAll(input, 0, input.Length, fallbackTransform);
-    }
-}

DiscordChatExporter.Core.Markdown/Internal/IMatcher.cs

@@ -1,7 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Internal
-{
-    internal interface IMatcher<T>
-    {
-        ParsedMatch<T> Match(string input, int startIndex, int length);
-    }
-}

DiscordChatExporter.Core.Markdown/Internal/ParsedMatch.cs

@@ -1,18 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Internal
-{
-    internal class ParsedMatch<T>
-    {
-        public int StartIndex { get; }
-
-        public int Length { get; }
-
-        public T Value { get; }
-
-        public ParsedMatch(int startIndex, int length, T value)
-        {
-            StartIndex = startIndex;
-            Length = length;
-            Value = value;
-        }
-    }
-}

DiscordChatExporter.Core.Markdown/Internal/RegexMatcher.cs

@@ -1,23 +0,0 @@
-using System;
-using System.Text.RegularExpressions;
-
-namespace DiscordChatExporter.Core.Markdown.Internal
-{
-    internal class RegexMatcher<T> : IMatcher<T>
-    {
-        private readonly Regex _regex;
-        private readonly Func<Match, T> _transform;
-
-        public RegexMatcher(Regex regex, Func<Match, T> transform)
-        {
-            _regex = regex;
-            _transform = transform;
-        }
-
-        public ParsedMatch<T> Match(string input, int startIndex, int length)
-        {
-            var match = _regex.Match(input, startIndex, length);
-            return match.Success ? new ParsedMatch<T>(match.Index, match.Length, _transform(match)) : null;
-        }
-    }
-}

DiscordChatExporter.Core.Markdown/Internal/StringMatcher.cs

@@ -1,29 +0,0 @@
-using System;
-
-namespace DiscordChatExporter.Core.Markdown.Internal
-{
-    internal class StringMatcher<T> : IMatcher<T>
-    {
-        private readonly string _needle;
-        private readonly StringComparison _comparison;
-        private readonly Func<string, T> _transform;
-
-        public StringMatcher(string needle, StringComparison comparison, Func<string, T> transform)
-        {
-            _needle = needle;
-            _comparison = comparison;
-            _transform = transform;
-        }
-
-        public StringMatcher(string needle, Func<string, T> transform)
-            : this(needle, StringComparison.Ordinal, transform)
-        {
-        }
-
-        public ParsedMatch<T> Match(string input, int startIndex, int length)
-        {
-            var index = input.IndexOf(_needle, startIndex, length, _comparison);
-            return index >= 0 ? new ParsedMatch<T>(index, _needle.Length, _transform(_needle)) : null;
-        }
-    }
-}

DiscordChatExporter.Core.Markdown/MarkdownParser.cs

@@ -1,205 +0,0 @@
-using System.Collections.Generic;
-using System.Linq;
-using System.Text.RegularExpressions;
-using DiscordChatExporter.Core.Markdown.Internal;
-using DiscordChatExporter.Core.Markdown.Nodes;
-using Tyrrrz.Extensions;
-
-namespace DiscordChatExporter.Core.Markdown
-{
-    // The following parsing logic is meant to replicate Discord's markdown grammar as close as possible
-    public static class MarkdownParser
-    {
-        private const RegexOptions DefaultRegexOptions = RegexOptions.Compiled | RegexOptions.CultureInvariant;
-
-        /* Formatting */
-
-        // Capture any character until the earliest double asterisk not followed by an asterisk
-        private static readonly IMatcher<Node> BoldFormattedNodeMatcher = new RegexMatcher<Node>(
-            new Regex("\\*\\*(.+?)\\*\\*(?!\\*)", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new FormattedNode(m.Value, "**", TextFormatting.Bold, Parse(m.Groups[1].Value)));
-
-        // Capture any character until the earliest single asterisk not preceded or followed by an asterisk
-        // Opening asterisk must not be followed by whitespace
-        // Closing asterisk must not be preceded by whitespace
-        private static readonly IMatcher<Node> ItalicFormattedNodeMatcher = new RegexMatcher<Node>(
-            new Regex("\\*(?!\\s)(.+?)(?<!\\s|\\*)\\*(?!\\*)", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new FormattedNode(m.Value, "*", TextFormatting.Italic, Parse(m.Groups[1].Value)));
-
-        // Capture any character until the earliest triple asterisk not followed by an asterisk
-        private static readonly IMatcher<Node> ItalicBoldFormattedNodeMatcher = new RegexMatcher<Node>(
-            new Regex("\\*(\\*\\*.+?\\*\\*)\\*(?!\\*)", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new FormattedNode(m.Value, "*", TextFormatting.Italic, Parse(m.Groups[1].Value, BoldFormattedNodeMatcher)));
-
-        // Capture any character except underscore until an underscore
-        // Closing underscore must not be followed by a word character
-        private static readonly IMatcher<Node> ItalicAltFormattedNodeMatcher = new RegexMatcher<Node>(
-            new Regex("_([^_]+)_(?!\\w)", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new FormattedNode(m.Value, "_", TextFormatting.Italic, Parse(m.Groups[1].Value)));
-
-        // Capture any character until the earliest double underscore not followed by an underscore
-        private static readonly IMatcher<Node> UnderlineFormattedNodeMatcher = new RegexMatcher<Node>(
-            new Regex("__(.+?)__(?!_)", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new FormattedNode(m.Value, "__", TextFormatting.Underline, Parse(m.Groups[1].Value)));
-
-        // Capture any character until the earliest triple underscore not followed by an underscore
-        private static readonly IMatcher<Node> ItalicUnderlineFormattedNodeMatcher = new RegexMatcher<Node>(
-            new Regex("_(__.+?__)_(?!_)", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new FormattedNode(m.Value, "_", TextFormatting.Italic, Parse(m.Groups[1].Value, UnderlineFormattedNodeMatcher)));
-
-        // Capture any character until the earliest double tilde
-        private static readonly IMatcher<Node> StrikethroughFormattedNodeMatcher = new RegexMatcher<Node>(
-            new Regex("~~(.+?)~~", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new FormattedNode(m.Value, "~~", TextFormatting.Strikethrough, Parse(m.Groups[1].Value)));
-
-        // Capture any character until the earliest double pipe
-        private static readonly IMatcher<Node> SpoilerFormattedNodeMatcher = new RegexMatcher<Node>(
-            new Regex("\\|\\|(.+?)\\|\\|", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new FormattedNode(m.Value, "||", TextFormatting.Spoiler, Parse(m.Groups[1].Value)));
-
-        /* Code blocks */
-
-        // Capture any character except backtick until a backtick
-        // Whitespace surrounding content inside backticks is trimmed
-        private static readonly IMatcher<Node> InlineCodeBlockNodeMatcher = new RegexMatcher<Node>(
-            new Regex("`([^`]+)`", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new InlineCodeBlockNode(m.Value, m.Groups[1].Value.Trim()));
-
-        // Capture language identifier and then any character until the earliest triple backtick
-        // Languge identifier is one word immediately after opening backticks, followed immediately by newline
-        // Whitespace surrounding content inside backticks is trimmed
-        private static readonly IMatcher<Node> MultilineCodeBlockNodeMatcher = new RegexMatcher<Node>(
-            new Regex("```(?:(\\w*)\\n)?(.+?)```", DefaultRegexOptions | RegexOptions.Singleline),
-            m => new MultilineCodeBlockNode(m.Value, m.Groups[1].Value, m.Groups[2].Value.Trim()));
-
-        /* Mentions */
-
-        // Capture @everyone
-        private static readonly IMatcher<Node> EveryoneMentionNodeMatcher = new StringMatcher<Node>(
-            "@everyone",
-            s => new MentionNode(s, "everyone", MentionType.Meta));
-
-        // Capture @here
-        private static readonly IMatcher<Node> HereMentionNodeMatcher = new StringMatcher<Node>(
-            "@here",
-            s => new MentionNode(s, "here", MentionType.Meta));
-
-        // Capture <@123456> or <@!123456>
-        private static readonly IMatcher<Node> UserMentionNodeMatcher = new RegexMatcher<Node>(
-            new Regex("<@!?(\\d+)>", DefaultRegexOptions),
-            m => new MentionNode(m.Value, m.Groups[1].Value, MentionType.User));
-
-        // Capture <#123456>
-        private static readonly IMatcher<Node> ChannelMentionNodeMatcher = new RegexMatcher<Node>(
-            new Regex("<#(\\d+)>", DefaultRegexOptions),
-            m => new MentionNode(m.Value, m.Groups[1].Value, MentionType.Channel));
-
-        // Capture <@&123456>
-        private static readonly IMatcher<Node> RoleMentionNodeMatcher = new RegexMatcher<Node>(
-            new Regex("<@&(\\d+)>", DefaultRegexOptions),
-            m => new MentionNode(m.Value, m.Groups[1].Value, MentionType.Role));
-
-        /* Emojis */
-
-        // Capture any country flag emoji (two regional indicator surrogate pairs)
-        // ... or "symbol/other" character
-        // ... or surrogate pair
-        // ... or digit followed by enclosing mark
-        // (this does not match all emojis in Discord but it's reasonably accurate enough)
-        private static readonly IMatcher<Node> StandardEmojiNodeMatcher = new RegexMatcher<Node>(
-            new Regex("((?:[\\uD83C][\\uDDE6-\\uDDFF]){2}|\\p{So}|\\p{Cs}{2}|\\d\\p{Me})", DefaultRegexOptions),
-            m => new EmojiNode(m.Value, m.Groups[1].Value));
-
-        // Capture <:lul:123456> or <a:lul:123456>
-        private static readonly IMatcher<Node> CustomEmojiNodeMatcher = new RegexMatcher<Node>(
-            new Regex("<(a)?:(.+?):(\\d+?)>", DefaultRegexOptions),
-            m => new EmojiNode(m.Value, m.Groups[3].Value, m.Groups[2].Value, !m.Groups[1].Value.IsNullOrWhiteSpace()));
-
-        /* Links */
-
-        // Capture [title](link)
-        private static readonly IMatcher<Node> TitledLinkNodeMatcher = new RegexMatcher<Node>(
-            new Regex("\\[(.+?)\\]\\((.+?)\\)", DefaultRegexOptions),
-            m => new LinkNode(m.Value, m.Groups[2].Value, m.Groups[1].Value));
-
-        // Capture any non-whitespace character after http:// or https:// until the last punctuation character or whitespace
-        private static readonly IMatcher<Node> AutoLinkNodeMatcher = new RegexMatcher<Node>(
-            new Regex("(https?://\\S*[^\\.,:;\"\'\\s])", DefaultRegexOptions),
-            m => new LinkNode(m.Value, m.Groups[1].Value));
-
-        // Same as auto link but also surrounded by angular brackets
-        private static readonly IMatcher<Node> HiddenLinkNodeMatcher = new RegexMatcher<Node>(
-            new Regex("<(https?://\\S*[^\\.,:;\"\'\\s])>", DefaultRegexOptions),
-            m => new LinkNode(m.Value, m.Groups[1].Value));
-
-        /* Text */
-
-        // Capture the shrug emoticon
-        // This escapes it from matching for formatting
-        private static readonly IMatcher<Node> ShrugTextNodeMatcher = new StringMatcher<Node>(
-            @"¯\_(ツ)_/¯",
-            s => new TextNode(s));
-
-        // Capture some specific emojis that don't get rendered
-        // This escapes it from matching for emoji
-        private static readonly IMatcher<Node> IgnoredEmojiTextNodeMatcher = new RegexMatcher<Node>(
-            new Regex("(\\u26A7|\\u2640|\\u2642|\\u2695|\\u267E|\\u00A9|\\u00AE|\\u2122)", DefaultRegexOptions),
-            m => new TextNode(m.Value, m.Groups[1].Value));
-
-        // Capture any "symbol/other" character or surrogate pair preceded by a backslash
-        // This escapes it from matching for emoji
-        private static readonly IMatcher<Node> EscapedSymbolTextNodeMatcher = new RegexMatcher<Node>(
-            new Regex("\\\\(\\p{So}|\\p{Cs}{2})", DefaultRegexOptions),
-            m => new TextNode(m.Value, m.Groups[1].Value));
-
-        // Capture any non-whitespace, non latin alphanumeric character preceded by a backslash
-        // This escapes it from matching for formatting or other tokens
-        private static readonly IMatcher<Node> EscapedCharacterTextNodeMatcher = new RegexMatcher<Node>(
-            new Regex("\\\\([^a-zA-Z0-9\\s])", DefaultRegexOptions),
-            m => new TextNode(m.Value, m.Groups[1].Value));
-
-        // Combine all matchers into one
-        // Matchers that have similar patterns are ordered from most specific to least specific
-        private static readonly IMatcher<Node> AggregateNodeMatcher = new AggregateMatcher<Node>(
-            // Escaped text
-            ShrugTextNodeMatcher,
-            IgnoredEmojiTextNodeMatcher,
-            EscapedSymbolTextNodeMatcher,
-            EscapedCharacterTextNodeMatcher,
-
-            // Formatting
-            ItalicBoldFormattedNodeMatcher,
-            ItalicUnderlineFormattedNodeMatcher,
-            BoldFormattedNodeMatcher,
-            ItalicFormattedNodeMatcher,
-            UnderlineFormattedNodeMatcher,
-            ItalicAltFormattedNodeMatcher,
-            StrikethroughFormattedNodeMatcher,
-            SpoilerFormattedNodeMatcher,
-
-            // Code blocks
-            MultilineCodeBlockNodeMatcher,
-            InlineCodeBlockNodeMatcher,
-
-            // Mentions
-            EveryoneMentionNodeMatcher,
-            HereMentionNodeMatcher,
-            UserMentionNodeMatcher,
-            ChannelMentionNodeMatcher,
-            RoleMentionNodeMatcher,
-
-            // Links
-            TitledLinkNodeMatcher,
-            AutoLinkNodeMatcher,
-            HiddenLinkNodeMatcher,
-
-            // Emoji
-            StandardEmojiNodeMatcher,
-            CustomEmojiNodeMatcher);
-
-        private static IReadOnlyList<Node> Parse(string input, IMatcher<Node> matcher) =>
-            matcher.MatchAll(input, s => new TextNode(s)).Select(r => r.Value).ToArray();
-
-        public static IReadOnlyList<Node> Parse(string input) => Parse(input, AggregateNodeMatcher);
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/EmojiNode.cs

@@ -1,30 +0,0 @@
-using Tyrrrz.Extensions;
-
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public class EmojiNode : Node
-    {
-        public string Id { get; }
-
-        public string Name { get; }
-
-        public bool IsAnimated { get; }
-
-        public bool IsCustomEmoji => !Id.IsNullOrWhiteSpace();
-
-        public EmojiNode(string source, string id, string name, bool isAnimated)
-            : base(source)
-        {
-            Id = id;
-            Name = name;
-            IsAnimated = isAnimated;
-        }
-
-        public EmojiNode(string source, string name)
-            : this(source, null, name, false)
-        {
-        }
-
-        public override string ToString() => $"<Emoji> {Name}";
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/FormattedNode.cs

@@ -1,23 +0,0 @@
-using System.Collections.Generic;
-
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public class FormattedNode : Node
-    {
-        public string Token { get; }
-
-        public TextFormatting Formatting { get; }
-
-        public IReadOnlyList<Node> Children { get; }
-
-        public FormattedNode(string source, string token, TextFormatting formatting, IReadOnlyList<Node> children)
-            : base(source)
-        {
-            Token = token;
-            Formatting = formatting;
-            Children = children;
-        }
-
-        public override string ToString() => $"<{Formatting}> ({Children.Count} direct children)";
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/InlineCodeBlockNode.cs

@@ -1,15 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public class InlineCodeBlockNode : Node
-    {
-        public string Code { get; }
-
-        public InlineCodeBlockNode(string source, string code)
-            : base(source)
-        {
-            Code = code;
-        }
-
-        public override string ToString() => $"<Code> {Code}";
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/LinkNode.cs

@@ -1,22 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public class LinkNode : Node
-    {
-        public string Url { get; }
-
-        public string Title { get; }
-
-        public LinkNode(string source, string url, string title)
-            : base(source)
-        {
-            Url = url;
-            Title = title;
-        }
-
-        public LinkNode(string source, string url) : this(source, url, url)
-        {
-        }
-
-        public override string ToString() => $"<Link> {Title}";
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/MentionNode.cs

@@ -1,18 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public class MentionNode : Node
-    {
-        public string Id { get; }
-
-        public MentionType Type { get; }
-
-        public MentionNode(string source, string id, MentionType type)
-            : base(source)
-        {
-            Id = id;
-            Type = type;
-        }
-
-        public override string ToString() => $"<{Type} mention> {Id}";
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/MentionType.cs

@@ -1,10 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public enum MentionType
-    {
-        Meta,
-        User,
-        Channel,
-        Role
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/MultilineCodeBlockNode.cs

@@ -1,18 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public class MultilineCodeBlockNode : Node
-    {
-        public string Language { get; }
-
-        public string Code { get; }
-
-        public MultilineCodeBlockNode(string source, string language, string code)
-            : base(source)
-        {
-            Language = language;
-            Code = code;
-        }
-
-        public override string ToString() => $"<Code [{Language}]> {Code}";
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/Node.cs

@@ -1,12 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public abstract class Node
-    {
-        public string Source { get; }
-
-        protected Node(string source)
-        {
-            Source = source;
-        }
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/TextFormatting.cs

@@ -1,11 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public enum TextFormatting
-    {
-        Bold,
-        Italic,
-        Underline,
-        Strikethrough,
-        Spoiler
-    }
-}

DiscordChatExporter.Core.Markdown/Nodes/TextNode.cs

@@ -1,19 +0,0 @@
-namespace DiscordChatExporter.Core.Markdown.Nodes
-{
-    public class TextNode : Node
-    {
-        public string Text { get; }
-
-        public TextNode(string source, string text)
-            : base(source)
-        {
-            Text = text;
-        }
-
-        public TextNode(string text) : this(text, text)
-        {
-        }
-
-        public override string ToString() => Text;
-    }
-}

DiscordChatExporter.Core.Models/Attachment.cs

@@ -1,50 +0,0 @@
-using System;
-using System.IO;
-using System.Linq;
-
-namespace DiscordChatExporter.Core.Models
-{
-    // https://discordapp.com/developers/docs/resources/channel#attachment-object
-
-    public partial class Attachment
-    {
-        public string Id { get; }
-
-        public string Url { get; }
-
-        public int? Width { get; }
-
-        public int? Height { get; }
-
-        public string FileName { get; }
-
-        public bool IsImage { get; }
-
-        public FileSize FileSize { get; }
-
-        public Attachment(string id, int? width, int? height, string url, string fileName, FileSize fileSize)
-        {
-            Id = id;
-            Url = url;
-            Width = width;
-            Height = height;
-            FileName = fileName;
-            FileSize = fileSize;
-
-            IsImage = GetIsImage(fileName);
-        }
-
-        public override string ToString() => FileName;
-    }
-
-    public partial class Attachment
-    {
-        private static readonly string[] ImageFileExtensions = { ".jpg", ".jpeg", ".png", ".gif", ".bmp" };
-
-        public static bool GetIsImage(string fileName)
-        {
-            var fileExtension = Path.GetExtension(fileName);
-            return ImageFileExtensions.Contains(fileExtension, StringComparer.OrdinalIgnoreCase);
-        }
-    }
-}

DiscordChatExporter.Core.Models/AuthToken.cs

@@ -1,15 +0,0 @@
-namespace DiscordChatExporter.Core.Models
-{
-    public class AuthToken
-    {
-        public AuthTokenType Type { get; }
-
-        public string Value { get; }
-
-        public AuthToken(AuthTokenType type, string value)
-        {
-            Type = type;
-            Value = value;
-        }
-    }
-}

DiscordChatExporter.Core.Models/AuthTokenType.cs

@@ -1,8 +0,0 @@
-namespace DiscordChatExporter.Core.Models
-{
-    public enum AuthTokenType
-    {
-        User,
-        Bot
-    }
-}

DiscordChatExporter.Core.Models/Channel.cs

@@ -1,37 +0,0 @@
-namespace DiscordChatExporter.Core.Models
-{
-    // https://discordapp.com/developers/docs/resources/channel#channel-object
-
-    public partial class Channel
-    {
-        public string Id { get; }
-
-        public string ParentId { get; }
-
-        public string GuildId { get; }
-
-        public string Name { get; }
-
-        public string Topic { get; }
-
-        public ChannelType Type { get; }
-
-        public Channel(string id, string parentId, string guildId, string name, string topic, ChannelType type)
-        {
-            Id = id;
-            ParentId = parentId;
-            GuildId = guildId;
-            Name = name;
-            Topic = topic;
-            Type = type;
-        }
-
-        public override string ToString() => Name;
-    }
-
-    public partial class Channel
-    {
-        public static Channel CreateDeletedChannel(string id) =>
-            new Channel(id, null, null, "deleted-channel", null, ChannelType.GuildTextChat);
-    }
-}

DiscordChatExporter.Core.Models/ChannelType.cs

@@ -1,13 +0,0 @@
-namespace DiscordChatExporter.Core.Models
-{
-    // https://discordapp.com/developers/docs/resources/channel#channel-object-channel-types
-
-    public enum ChannelType
-    {
-        GuildTextChat,
-        DirectTextChat,
-        GuildVoiceChat,
-        DirectGroupTextChat,
-        Category
-    }
-}

DiscordChatExporter.Core.Models/ChatLog.cs

@@ -1,33 +0,0 @@
-using System;
-using System.Collections.Generic;
-
-namespace DiscordChatExporter.Core.Models
-{
-    public class ChatLog
-    {
-        public Guild Guild { get; }
-
-        public Channel Channel { get; }
-
-        public DateTimeOffset? After { get; }
-
-        public DateTimeOffset? Before { get; }
-
-        public IReadOnlyList<Message> Messages { get; }
-
-        public Mentionables Mentionables { get; }
-
-        public ChatLog(Guild guild, Channel channel, DateTimeOffset? after, DateTimeOffset? before,
-            IReadOnlyList<Message> messages, Mentionables mentionables)
-        {
-            Guild = guild;
-            Channel = channel;
-            After = after;
-            Before = before;
-            Messages = messages;
-            Mentionables = mentionables;
-        }
-
-        public override string ToString() => $"{Guild.Name} | {Channel.Name}";
-    }
-}

DiscordChatExporter.Core.Models/DiscordChatExporter.Core.Models.csproj

@@ -1,12 +0,0 @@
-<Project Sdk="Microsoft.NET.Sdk">
-
-  <PropertyGroup>
-    <TargetFrameworks>net46;netstandard2.0</TargetFrameworks>
-    <LangVersion>latest</LangVersion>
-  </PropertyGroup>
-
-  <ItemGroup>
-    <PackageReference Include="Tyrrrz.Extensions" Version="1.6.2" />
-  </ItemGroup>
-
-</Project>

DiscordChatExporter.Core.Models/Embed.cs

@@ -1,48 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Drawing;
-
-namespace DiscordChatExporter.Core.Models
-{
-    // https://discordapp.com/developers/docs/resources/channel#embed-object
-
-    public class Embed
-    {
-        public string Title { get; }
-
-        public string Url { get; }
-
-        public DateTimeOffset? Timestamp { get; }
-
-        public Color Color { get; }
-
-        public EmbedAuthor Author { get; }
-
-        public string Description { get; }
-
-        public IReadOnlyList<EmbedField> Fields { get; }
-
-        public EmbedImage Thumbnail { get; }
-
-        public EmbedImage Image { get; }
-
-        public EmbedFooter Footer { get; }
-
-        public Embed(string title, string url, DateTimeOffset? timestamp, Color color, EmbedAuthor author, string description,
-            IReadOnlyList<EmbedField> fields, EmbedImage thumbnail, EmbedImage image, EmbedFooter footer)
-        {
-            Title = title;
-            Url = url;
-            Timestamp = timestamp;
-            Color = color;
-            Author = author;
-            Description = description;
-            Fields = fields;
-            Thumbnail = thumbnail;
-            Image = image;
-            Footer = footer;
-        }
-
-        public override string ToString() => Title;
-    }
-}

DiscordChatExporter.Core.Models/EmbedAuthor.cs

@@ -1,22 +0,0 @@
-namespace DiscordChatExporter.Core.Models
-{
-    // https://discordapp.com/developers/docs/resources/channel#embed-object-embed-author-structure
-
-    public class EmbedAuthor
-    {
-        public string Name { get; }
-
-        public string Url { get; }
-
-        public string IconUrl { get; }
-
-        public EmbedAuthor(string name, string url, string iconUrl)
-        {
-            Name = name;
-            Url = url;
-            IconUrl = iconUrl;
-        }
-
-        public override string ToString() => Name;
-    }
-}

DiscordChatExporter.Core.Models/EmbedField.cs

@@ -1,22 +0,0 @@
-namespace DiscordChatExporter.Core.Models
-{
-    // https://discordapp.com/developers/docs/resources/channel#embed-object-embed-field-structure
-
-    public class EmbedField
-    {
-        public string Name { get; }
-
-        public string Value { get; }
-
-        public bool IsInline { get; }
-
-        public EmbedField(string name, string value, bool isInline)
-        {
-            Name = name;
-            Value = value;
-            IsInline = isInline;
-        }
-
-        public override string ToString() => $"{Name} | {Value}";
-    }
-}

DiscordChatExporter.Core.Models/EmbedFooter.cs

@@ -1,19 +0,0 @@
-namespace DiscordChatExporter.Core.Models
-{
-    // https://discordapp.com/developers/docs/resources/channel#embed-object-embed-footer-structure
-
-    public class EmbedFooter
-    {
-        public string Text { get; }
-
-        public string IconUrl { get; }
-
-        public EmbedFooter(string text, string iconUrl)
-        {
-            Text = text;
-            IconUrl = iconUrl;
-        }
-
-        public override string ToString() => Text;
-    }
-}

DiscordChatExporter.Core.Models/EmbedImage.cs

@@ -1,20 +0,0 @@
-namespace DiscordChatExporter.Core.Models
-{
-    // https://discordapp.com/developers/docs/resources/channel#embed-object-embed-image-structure
-
-    public class EmbedImage
-    {
-        public string Url { get; }
-
-        public int? Width { get; }
-
-        public int? Height { get; }
-
-        public EmbedImage(string url, int? width, int? height)
-        {
-            Url = url;
-            Height = height;
-            Width = width;
-        }
-    }
-}

DiscordChatExporter.Core.Models/Emoji.cs

@@ -1,58 +0,0 @@
-using System.Collections.Generic;
-using System.Linq;
-using Tyrrrz.Extensions;
-
-namespace DiscordChatExporter.Core.Models
-{
-    // https://discordapp.com/developers/docs/resources/emoji#emoji-object
-
-    public partial class Emoji
-    {
-        public string Id { get; }
-
-        public string Name { get; }
-
-        public bool IsAnimated { get; }
-
-        public string ImageUrl { get; }
-
-        public Emoji(string id, string name, bool isAnimated)
-        {
-            Id = id;
-            Name = name;
-            IsAnimated = isAnimated;
-
-            ImageUrl = GetImageUrl(id, name, isAnimated);
-        }
-    }
-
-    public partial class Emoji
-    {
-        private static IEnumerable<int> GetCodePoints(string emoji)
-        {
-            for (var i = 0; i < emoji.Length; i += char.IsHighSurrogate(emoji[i]) ? 2 : 1)
-                yield return char.ConvertToUtf32(emoji, i);
-        }
-
-        private static string GetTwemojiName(string emoji) =>
-            GetCodePoints(emoji).Select(i => i.ToString("x")).JoinToString("-");
-
-        public static string GetImageUrl(string id, string name, bool isAnimated)
-        {
-            // Custom emoji
-            if (!id.IsNullOrWhiteSpace())
-            {
-                // Animated
-                if (isAnimated)
-                    return $"https://cdn.discordapp.com/emojis/{id}.gif";
-
-                // Non-animated
-                return $"https://cdn.discordapp.com/emojis/{id}.png";
-            }
-
-            // Standard unicode emoji (via twemoji)
-            var twemojiName = GetTwemojiName(name);
-            return $"https://twemoji.maxcdn.com/2/72x72/{twemojiName}.png";
-        }
-    }
-}

DiscordChatExporter.Core.Models/ExportFormat.cs

@@ -1,10 +0,0 @@
-namespace DiscordChatExporter.Core.Models
-{
-    public enum ExportFormat
-    {
-        PlainText,
-        HtmlDark,
-        HtmlLight,
-        Csv
-    }
-}